Surface Mount Low Power Step Recovery Diodes
www.DataSheet4U.com
Also Offering RoHs Compliant MA44700 Series V4
Absolute Maximum Ratings @ TA=+25 °C
(Unless Otherwi...
Description
www.DataSheet4U.com
Also Offering RoHs Compliant MA44700 Series V4
Absolute Maximum Ratings @ TA=+25 °C
(Unless Otherwise Noted) 1
Parameter Operating Temperature Storage Temperature Reverse Voltage Forward Bias Current Power Dissipation Absolute Maximum -65 °C to +125 °C -65 °C to +125 °C 30V 50 mA 250 mW
Surface Mount Low Power Step Recovery Diodes
Features
Surface Mount Packages (SOT-23,SC-79) Low transition times SPC Process for Superior C-V Repeatability Tape and Reel Packaging Designed for Commercial Wireless Applications
Description
The MA44700 series of Step Recovery diodes is designed for use in low power multipliers with output frequencies of up to 5 GHz. These Step Recovery diodes generate harmonics by storing a charge as the diode is driven to forward conductance by the positive voltage of the input signal. When the signal reverses polarity, this charge is extracted. The Step Recovery diode will appear as a low impedance currentsource until all the charge is extracted, then it will “snap” to a higher impedance. This causes a voltage pulse to form in the impulse circuit of the multiplier. Step Recovery diodes make excellent high order multipliers such as comb generators. They are also useful as efficient moderate power X2-X4 multipliers.
1. Operation of this device above any one of these parameters may cause permanent damage. 2. Please refer to application note M538 for surface mounting instructions
Typical Capacitance vs. Bias (V) freq=1MHz
8 7 6
M...
Similar Datasheet