Document
www.DataSheet4U.com
TO-5 Double-Balanced Mixer, 5 - 500 MHz
Features
Convenient Microstrip or Stripline Mounting Low Conversion Loss: 7 dB Impedance: 50 Ohms Nominal Maximum Input Power: 300 mW max. @ 25°C, Derated linearly to 85°C @ 3.2 mW/°C • IF Port Current: 50 mA Max. • MIL-STD-883 Screening Available • • • •
MAC-51 V3
TO-5-2
Description
Transformers convert the LO and RF paths to balanced lines connecting to a low barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion Loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators.
Pin Configuration
Pin No. 1 2 Function LO IF Pin No. 3 4 Function RF GND
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
TO-5 Double-Balanced Mixer, 5 - 500 MHz
Electrical Specifications1: TA = -55°C to +85°C
Parameter Frequency Range Conversion Loss Isolation LO to RF Test Conditions RF, LO Ports IF Port Frequency 5 - 500 DC - 500 — 5 - 50 MHz 50 - 500 MHz 5 - 50 MHz 50 - 500 MHz 5 - 50 MHz 50 - 500 MHz — Units MHz MHz dB dB dB dB dB dB dB — mV 1 dB Compression 1 dB Desensitization Within 1 dB of Conversion Loss Max. — dBm dBm — Min — — — 35 25 35 25 20 20 — — — — — Typ — — — — — — — — — — <3 +2 -1.5 — Max — — 7.0 — — — — — — — — — — —
MAC-51 V3
LO to IF
RF to IF
DC Polarity DC Offset RF Input2 SSB Noise Figure
Negative
1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance. 2. Measured at 100 MHz
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
TO-5 Double-Balanced Mixer, 5 - 500 MHz
Typical Performance Curves
MAC-51 V3
Ordering Information
Part Number MAC-51 PIN
Package TO-5-2
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
.