Diode Driver. MADR-007097-000100 Datasheet

MADR-007097-000100 Driver. Datasheet pdf. Equivalent

Part MADR-007097-000100
Description SPDT PIN Diode Driver
Feature MADR-007097-000100 SPDT PIN Diode Driver Features • Moderate Speed, CMOS Technology (25 nS) • Comple.
Manufacture Tyco Electronics
Datasheet
Download MADR-007097-000100 Datasheet



MADR-007097-000100
MADR-007097-000100
SPDT PIN Diode Driver
Features
Moderate Speed, CMOS Technology (25 nS)
Complementary Outputs
High Drive Current Capability (± 50 mA)
Low Current Consumption
Plastic SOIC Body for SMT Applications
Tape and Reel Packaging Available
Lead-Free SOIC-8 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of DR65-0003
Description
M/A-COM's MADR-007097-000100 is a SPDT driver
used to interface between TTL logic signals and PIN
diode based microwave switches. High-speed
analog CMOS technology is used to achieve low
power consumption at moderate speeds. Low output
resistances allow it to develop high output current
spikes to ensure fast switching speeds. The
complementary output stages are structured so it
can be used as an inverting or non-inverting driver
for SPST switches, or as a single input,
complementary driver for SPDT switches. The
monolithic die is packaged in a SO-8, plastic surface
mount package and is available in tape and reel
packaging for high volume applications. The MADR-
007097-000100 driver is ideally suited for driving M/
A-COM’s line of HMIC switches.
Ordering Information
Part Number
MADR-007097-000100
MADR-007097-0001TR
Package
Bulk Packaging
1000 piece reel
Note: Reference Application Note M513 for reel size
information.
Functional Block Diagram
Rev. V3
Pin Configuration
Pin No.
1
2
3
4
Function
NON-INV OUT
GND
VCC
C1
(TTL Logic)
Pin No.
5
6
7
8
Function
VEE
VDD
GND
INV OUT
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
India Tel: +91.80.4155721
China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.



MADR-007097-000100
MADR-007097-000100
SPDT PIN Diode Driver
Rev. V3
Electrical Specifications: TA = +25°C, +Vcc = + Vdd = + 5.0V ± 5%, Vee = - 5.0V ±5%, Z0 = 50Ω
Parameter
Switching Speed 1
Delay
Rt/Ft
PRF
Output Voltage Drop, No Load
DC Output Current
Peak Spike Output Current
Output Stage on Resistance
Quiescent Supply Currents
TTL Levels
Package Dissipation
Test Conditions
Spike current into 10 ohm load
50 % TTL to 90%
10%-90%; 90%-10%
50% duty cycle
With reference to supply voltage
Load Dependant
Spiking Capacitor in Circuit
Positive Output FET, Qp
Negative Output FET, Qn
+5V
-5V
Logic “0” @ 20 µA sink current
Logic “1” @ 20 µA source current
Units
ns
ns
MHz
V
mA
mA
Ω
Ω
mA
mA
V
V
mW
Min
DC
0
2.0
Typ
25
2
±30
±150
15
10
Max
35
5
5
0.25
±50
±200
20
15
1.5
.2
.8
5.0
200
1. Decoupling capacitors (.01 µF) are required on power supply lines.
Absolute Maximum Ratings 2,3
Parameter
VCC
VDD
VEE
C1 (TTL Input Voltage)
Operating Temperature
Storage Temperature
Absolute Maximum
-0.5V VCC +7.0V
-0.5V VDD VCC
-7.0V VEE +0.5V
-0.5V to Vcc +0.5V
-40ºC to +85ºC
-65ºC to +125ºC
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Silicon Integrated Circuits are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
India Tel: +91.80.4155721
China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)