CATV Amplifier. AG606 Datasheet

AG606 Amplifier. Datasheet pdf. Equivalent

Part AG606
Description Push-Pull CATV Amplifier
Feature www.DataSheet4U.com AG606 The Communications Edge TM Product Information Push-Pull CATV Amplifier.
Manufacture WJ Communication
Datasheet
Download AG606 Datasheet



AG606
AG606www.DataSheet4U.com
Push-Pull CATV Amplifier
The Communications Edge TM
Product Information
Product Features
x 50 – 860 MHz
x ±0.7 dB Gain Flatness
x +20 dBm P1dB
x +37 dBm Output IP3
x +73 dBm Output IP2
x -68 dBc CTB
+34 dBmV/channel, 79 channels
x -80 dBc CSO
+34 dBmV/channel, 79 channels
x Matched amplifiers for a
push-pull configuration
x +7V Single Positive Supply
x MTTF > 1000 Years
Applications
x CATV Head End Equipment
x CATV Line Amplifiers
x FTTH Repeaters
Product Description
The AG606 is a dual amplifier containing two internal
matched amplifiers optimal for a push-pull configuration.
The internal amplifiers employ InGaP HBT technology
for a cost-effective low-distortion solution.
The AG606 is ideal for drop amplifiers, splitters, and
other low to moderate power outside plant CATV
applications. The amplifier can also be useful in low
power headend applications such as linear laser drivers.
The AG606 has excellent VSWR when used in a 75 :
push-pull configuration. It is provided in a low-cost
environmentally-friendly lead-free/green/RoHS-compliant
SOIC-8 package.
Functional Diagram
18
27
36
45
Function
Amp 1 Input
Amp 2 Input
Amp 2 Output
Amp 1 Output
Ground
Pin No.
1
4
5
8
2, 3, 6, 7,
Backside
paddle
Single-ended Device Specifications(1)
Parameter
Test Frequency
Gain
Output IP3 (2)
Device Current
Device Voltage
Units
MHz
dB
dBm
mA
V
Min
13.2
+33.5
76
Typ
800
14.3
+36
82.5
5.25
Max
15.5
90
1. Test conditions unless otherwise noted: T = 25 ºC, 800 MHz on each individual single-branch
amplifier in a 50¡ test fixture using a +7V supply and a 20.5 ¡ dropping resistor.
2. 3OIP measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
3. Typical parameters reflect performance in a push-pull application circuit.
4. Balun, board, and connector losses have not been extracted, but typically account of 0.4 dB loss
midband and 1.1 dB loss at 860 MHz.
5. Measured at +34 dBmV/channel, 79 channels Flat Loading.
6. OIP2 is measured at f1 + f2 at +5 dBm / tone.
Typical Performance (3)
Parameter
Frequency
Gain (4)
Input Return Loss
Output Return Loss
CTB (5)
CSO (5)
XMOD (5)
Output P1dB
Output IP2 (6)
Output IP3 (2)
Noise Figure (4)
Device Bias
Units
MHz
dB
dB
dB
dBc
dBc
dBc
dBm
dBm
dBm
dB
V
Typical
50 250 450 860
14.3 14.2 13.9 12.9
21 28 18 11
17 18 16 18
-69 -67 -67
-81 -87 -80
-60 -61 -60
+20.7 +20.5 +20.3 +22
+73.6 +76.1 +76.4 +76.6
+37.5 +37.5 +37.3 +39.2
5 5 5.3 5.9
+5.25 V @ 165 mA
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
Supply Voltage
RF Input Power (continuous)
Junction Temperature
Rating
-40 to +85 qC
-55 to +125 qC
+7 V
+13dBm
+250 qC
Operation of this device above any of these parameters may cause permanent damage.
Ordering Information
Part No.
AG606-G
AG606-PCB
Description
Push-pull CATV Amplifier
(lead-free/green/RoHS-compliant SOIC8 Pkg)
Fully Assembled CATV Evaluation Board
Specifications and information are subject to change without notice.
WJ Communications, Inc   Phone 1-800-WJ1-4401   FAX: 408-577-6621   e-mail: sales@wj.com   Web site: www.wj.com
Page 1 of 5 April 2006



AG606
AG606www.DataSheet4U.com
Push-Pull CATV Amplifier
The Communications Edge TM
Product Information
Typical Device Data – 50: Z0
S-Parameters (Vdev = +5.25 V, Icc = 82.5 mA, T = 25 ¢ C, unmatched 50 ohm system, calibrated to device leads)
These represent a single-ended amplifier in the AG606, with there being two matched amplifiers inside the package.
Freq (MHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang)
50
-12.03
178.56
14.61
177.32
-18.85
-0.01
-17.45
178.57
100
-12.09
174.32
14.61
175.28
-18.74
-1.56
-17.08
178.23
150
-11.81
172.20
14.62
173.13
-18.76
-2.21
-17.28
176.63
200
-11.81
169.91
14.59
170.74
-18.81
-3.25
-16.86
176.45
250
-11.64
168.30
14.62
168.67
-18.77
-3.74
-17.24
173.88
300
-11.79
166.47
14.63
165.71
-18.81
-4.12
-17.00
174.14
350
-11.76
164.70
14.68
163.24
-18.79
-4.96
-17.20
172.40
400
-12.02
162.35
14.59
161.23
-18.84
-5.99
-16.85
173.24
450
-11.92
159.27
14.48
158.25
-18.82
-5.99
-17.02
170.87
500
-11.92
156.13
14.53
156.14
-18.80
-6.63
-16.70
169.98
550
-11.77
154.71
14.48
154.05
-18.86
-7.58
-16.78
167.35
600
-11.75
151.64
14.52
151.45
-18.79
-8.02
-16.47
167.79
650
-11.67
150.04
14.45
148.59
-18.74
-9.17
-16.49
164.94
700
-11.89
147.47
14.41
146.59
-18.83
-9.41
-16.48
164.76
750
-11.72
145.07
14.43
144.30
-18.89
-10.48
-16.43
161.86
800
-11.76
143.08
14.33
141.92
-18.87
-11.22
-16.23
161.91
850
-11.56
141.20
14.36
139.40
-18.87
-11.88
-15.86
158.92
900
-11.65
138.97
14.26
137.14
-18.80
-12.23
-15.78
159.88
950
-11.57
137.28
14.28
134.86
-18.79
-13.52
-15.51
156.89
1000
-11.56
135.12
14.19
132.17
-18.86
-13.15
-15.34
156.79
Typical Device Data – 50: Z0
S-Parameters (Vdev = +5.25 V, Icc = 82.5 mA, T = 25 ¢ C, unmatched 37.5 ohm system, calibrated to device leads)
These represent a single-ended amplifier in the AG606, with there being two matched amplifiers inside the package.
Freq (MHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang)
50
-34.66
173.49
14.79
177.27
-18.66
-0.06
-19.98
-0.57
100
-33.64
133.95
14.81
175.12
-18.54
-1.71
-20.40
-3.63
150
-30.17
137.29
14.82
172.89
-18.56
-2.45
-20.15
-4.04
200
-29.21
131.02
14.80
170.45
-18.60
-3.54
-20.91
-7.28
250
-27.90
131.37
14.83
168.30
-18.57
-4.11
-20.34
-5.91
300
-28.12
124.34
14.84
165.33
-18.61
-4.51
-20.82
-9.61
350
-27.59
122.31
14.88
162.80
-18.59
-5.40
-20.57
-10.25
400
-27.52
110.86
14.79
160.77
-18.65
-6.45
-21.33
-14.80
450
-25.69
107.75
14.68
157.66
-18.62
-6.58
-21.31
-13.74
500
-24.49
101.63
14.73
155.45
-18.61
-7.32
-21.94
-15.66
550
-23.76
104.95
14.68
153.27
-18.66
-8.35
-22.13
-13.89
600
-22.84
100.16
14.72
150.61
-18.59
-8.86
-22.79
-18.83
650
-22.46
101.72
14.65
147.66
-18.53
-10.10
-23.13
-17.61
700
-22.06
95.00
14.60
145.62
-18.64
-10.38
-23.54
-19.44
750
-21.15
95.84
14.62
143.20
-18.70
-11.58
-24.06
-16.74
800
-20.79
94.07
14.53
140.77
-18.68
-12.37
-25.05
-20.60
850
-20.09
95.55
14.56
138.11
-18.67
-13.17
-26.61
-16.06
900
-19.78
92.24
14.45
135.83
-18.60
-13.53
-27.43
-23.50
950
-19.42
92.70
14.48
133.44
-18.59
-14.94
-29.28
-17.34
1000
-18.88
90.91
14.39
130.68
-18.66
-14.64
-31.32
-18.82
Specifications and information are subject to change without notice.
WJ Communications, Inc   Phone 1-800-WJ1-4401   FAX: 408-577-6621   e-mail: sales@wj.com   Web site: www.wj.com
Page 2 of 5 April 2006





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)