Splitter Module. MAMUSS0007 Datasheet

MAMUSS0007 Module. Datasheet pdf. Equivalent

Part MAMUSS0007
Description CATV Amplifier Splitter Module
Feature www.DataSheet4U.com CATV Amplifier Splitter Module Preliminary 50 - 860 MHz MAMUSS0007 V1P MAMUSS0.
Manufacture Tyco Electronics
Total Page 5 Pages
Datasheet
Download MAMUSS0007 Datasheet



MAMUSS0007
CATVwww.DataSheet4U.com Amplifier Splitter Module Preliminary
50 - 860 MHz
V1P
MAMUSS0007
Features
Low Noise Figure
Low Distortion
Surface Mount Package
Multifunction Integration
Single Positive Supply
75 ohm Impedance
Description
M/A-COM’s MAMUSS0007 is an
integrated module consisting of an
amplifier and two equal split power
dividers. The push-pull, low distortion,
amplifier includes the baluns and DC bias
circuitry. The device is ideally suited for
use in the CATV market where low noise
figure, low distortion and high linearity are
required.
Ordering Information
Part Number
MAMUSS0007
Package
SMT Package
MAMUSS0007SMB Sample Test Board (Includes 5 Samples)
Absolute Maximum Ratings 1
Parameter
Input Power
Operating Voltage
Operating Temperature
Storage Temperature
Absolute
Maximum
+20 dBm
+10 volts
-40 oC to +85 oC
-65 oC to +150 oC
1. Exceeding any one or combination of these limits
may cause permanent damage.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
Functional Schematic
OUT3 OUT2 OUT1
Vdd
IN
PPiInN CNoo.nfigPIuNrNaatimoen
Description
1 GND
2 GND
3 GND
4 GND
5 GND
6 GND
7 GND
8 GND
9 IN
10 GND
11 VDD
12 GND
13 OUT 1
14 GND
15 OUT 2
16 GND
17 OUT 3
18 GND
Ground
Ground
Ground
Ground
Ground
Ground
Ground
Ground
RF Input
Ground
+5V
Ground
RF Output 1
Ground
RF Output 2
Ground
RF Output 3
Ground
„ North America: Tel. (800) 366-2266
1
„ Asia/Pacific: Tel. +81-44-844-8296, Fax +81-44-844-8298
„ Europe: Tel. +44 (1908) 574 200, Fax +44 (1908) 574 300



MAMUSS0007
CATV Amplifier Splitter Module, 50 - 860 MHz
MAMUSS0007
V1P
Electrical Specifications: TA = 25°C, Freq: 50 - 860 MHz, VDD = +5 Volts, Z0 = 75 ohms
Gain
Parameter
Test Conditions
IN-OUT1, IN-OUT2
Units
dB
Min.
Typ.
5
Max.
Gain
IN-OUT3
dB
8.5
Gain Unbalance
IN-OUT1 vs IN-OUT2
dB
0.6
Gain Flatness
IN-OUT1/2
dB
1.6
Gain Flatness
IN-OUT 3
dB
1.0
Noise Figure
Noise Figure
Return Loss
IN-OUT1, IN-OUT2
50 – 150 MHz
150 – 860 MHz
IN-OUT 3
50 – 150 MHz
150 – 860 MHz
IN
dB
dB
dB
dB
dB
3.7
3.4
3.4
3.0
15
Return Loss
OUT
dB
17
Isolation
OUT-OUT
dB
24
Composite Triple Beat, CTB
Composite Second Order, CSO
Cross modulation
IDD
135 channels, +13 dBmV/
channel at the input.
135 channels, +13 dBmV/
channel at the input
135 channels, +13 dBmV/
channel at the input.
VDD = + 5 Volts
dBc
dBc
dBc
mA
-70
-73
-66
200
Static Sensitivity
Gallium Arsenide Integrated Circuits are
sensitive to electrostatic discharge (ESD) and
can be damaged by static electricity. Proper
ESD control techniques should be used when
handling these devices.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
„ North America: Tel. (800) 366-2266
2
„ Asia/Pacific: Tel. +81-44-844-8296, Fax +81-44-844-8298
„ Europe: Tel. +44 (1908) 574 200, Fax +44 (1908) 574 300





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)