MMIC Mixer. MAMXSS0012 Datasheet

MAMXSS0012 Mixer. Datasheet pdf. Equivalent

Part MAMXSS0012
Description Low Cost MMIC Mixer
Feature www.DataSheet4U.com RoHS Compliant MAMXSS0012 V1 Functional Schematic C1 Low Cost MMIC Mixer 800 -.
Manufacture Tyco Electronics
Total Page 3 Pages
Datasheet
Download MAMXSS0012 Datasheet



MAMXSS0012
www.DataSheet4U.com
Low Cost MMIC Mixer
800 - 1000 MHz
Features
Input Power @ 1 dB Compression: +15 dBm
High LO to RF Isolation: 35 dB
LO Drive Level: +3 to +8 dBm
DC - 200 MHz 3 dB IF Bandwidth
Does not require DC bias
Lead-Free SOT-25 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MD54-0005
Description
M/A-COM’s MAMXSS0012 is a passive mixer that
achieves the performance of a double balanced
diode mixer in a lead-free SOT-25 package. The
MAMXSS0012 is ideally suited for use where high
level RF signals and very wide dynamic range are
required. Typical applications include frequency up/
down conversion, modulation, and demodulation in
receivers and transmitters for base station and
portable systems.
The MAMXSS0012 employs GaAs FETs as mixing
elements to achieve a very wide dynamic range in a
low cost plastic package. The mixer operates with
LO drive levels of +3 dBm to +8 dBm. The LO port
may be externally tuned for operation in various
frequency bands.
M/A-COM's GaAs IC is fabricated using a mature
0.5 micron gate length GaAs MESFET process. The
process features full passivation for increased
performance and reliability.
Ordering Information
Part Number
MAMXSS0012
MAMXSS0012TR-3000
MAMXSS0012SMB
Package
Bulk Packaging
3000 piece reel
Designers Kit
Note: Reference Application Note M513 for reel size
information.
RoHS
Compliant
MAMXSS0012
V1
Functional Schematic
C1
L1
R1
321
45
Pin Configuration
Pin No.
1
2
3
Function
LO
Ground
Ground
Pin No.
4
5
Function
RF
IF
External Circuitry Parts List 1
Ref.
Designation
R1
L1
C1
LO = 840 MHz
820 Ohms
22 nH
3.3 pF
LO = 900 MHz
820 Ohms
18 nH
4 pF
1. All off-chip components are low-cost surface mount
components obtainable from multiple sources (0.060 in. x
0.030 in. or 0.080 in. x 0.050 in.).
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MAMXSS0012
Low Cost MMIC Mixer
800 - 1000 MHz
RoHS
Compliant
MAMXSS0012
V1
Electrical Specifications: RF=900 MHz (-10 dBm), LO=840 MHz (+5 dBm), IF=60 MHz, TA = 25°C
Parameter
Test Conditions
Conversion Loss
Isolation
VSWR
Input 1 dB Compression
LO to RF
LO to IF
RF to IF
RF Port
LO Port2
IF Port
RF Freq. = 900 MHz, LO = +5 dBm
Two-Tone IM Ratio3
Two tones at –10 dBm each,
Tone spacing = 100 KHz, IF = 60 MHz
2. With external LO Port matching. See functional schematic.
3. IMR vs. RF Drive can be calculated by the formula: IMR = 40-1.5* PIN
Units
dB
dB
dB
dB
Ratio
Ratio
Ratio
dBm
dBc
Min.
Typ.
8.0
35
25
20
2.0:1
2.0:1
2.0:1
15
55
Max.
9.0
Absolute Maximum Ratings 4,5
Parameter
RF Input Power
Low Drive Power
Storage Temperature
Operating Temperature
Absolute Maximum
+27 dBm
+27 dBm
-65°C to +150°C
-40°C to +85°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM does not recommend sustained operation near
these survivability limits.
Lead-Free SOT-25 Plastic Package
Spurious Table
4x 23.0 36.5 53.8 63.8
10.6 39.9 56.1 58.3
3x 34.1 21.6 53.9 53.4
21.3 21.8 57.6 59.3
2x 17.7 44.0 51.6 65.2
6.6 44.8 55.5 58.4
1x 14.3 0 57.0 63.7
4.0 0 57.6 56.3
0x X 13.9 50.2 59.1
X 13.4 53.1 56.5
0x 1x 2x 3x
Harmonic of RF
68.6
58.8
67.3
57.2
66.2
56.3
67.0
56.9
67.2
57.1
4x
The spurious table shows the spurious signals resulting from the
mixing of the RF and LO input signals, assuming down
conversion. Mixing products are indicated relative to the IF. The
lower frequency mixing term is shown for two different RF input
levels. The top number is for an RF input power of 0 dBm, the
lower number is for -10 dBm.
|nFRF - mFLO |, RF = 0 dBm
|nFRF - mFLO |, RF = -10 dBm
RF Frequency = 900 MHz
LO Frequency = 840 MHz
Reference Application Note M538 for lead-free solder reflow
recommendations.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)