SPDT Switch. MASW-007588 Datasheet

MASW-007588 Switch. Datasheet pdf. Equivalent

Part MASW-007588
Description GaAs Broadband SPDT Switch
Feature www.DataSheet4U.com RoHS Compliant MASW-007588 V1 Functional Schematic GND RFC GND GaAs Broadband .
Manufacture Tyco Electronics
Datasheet
Download MASW-007588 Datasheet



MASW-007588
www.DataSheet4U.com
GaAs Broadband SPDT Switch
DC - 6.0 GHz
RoHS
Compliant
MASW-007588
V1
Features
UNII, Hiperlan, and 802.11a+b/g Applications
Broadband Performance: DC-6 GHz
Low Insertion Loss: 0.9 dB at 6 GHz
High Isolation: 28 dB Typical
Fast Switching Speed: 0.5 µm GaAs PHEMT
High Power: 36 dBm P1dB
Fast Settling for Low Gate Lag Requirements
Lead-Free 3 mm 12-lead PQFN Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Reflow Compatible
Description
M/A-COM’s MASW-007588 is a broadband GaAs
PHEMT MMIC SPDT switch in a low cost, lead-free
3 mm 12-lead PQFN package. The MASW-007588
is ideally suited for applications where very small
size and low cost are required.
The MASW-007588, with its small size and low
height, is ideal for 802.11a and 802.11b/g PC card
and access point applications.
The MASW-007588 delivers high isolation, low
insertion loss and high linearity up to 6 GHz.
The MASW-007588 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Functional Schematic
GND RFC GND
VC1
RF1
GND
VC2
RF2
GND
GND GND GND
Pin Configuration
PIN No.
PIN Name
Description
1 VC1
Control 1
2 RF1
RF Port 1
3 GND
Ground
4 GND
Ground
5 GND
Ground
6 GND
Ground
7 GND
Ground
8 RF2
RF Port 2
9 VC2
Control 2
10 GND
Ground
11 RFC
RF Input
12 GND
Ground
13
Paddle 2
RF and DC Ground
2. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
Ordering Information1
Part Number
MASW-007588-TR3000
Package
3000 piece reel
MASW-007588-000SMB
Sample Test Board
(Includes 5 Samples)
1. Reference Application Note M513 for reel size information.
Absolute Maximum Ratings 3,4
Parameter
Absolute Maximum
Input Power @ 3 V Control
+37 dBm
Input Power @ 5 V Control
+39 dBm
Operating Voltage
Operating Temperature
+8.5 volts
-40°C to +85°C
Storage Temperature
-65°C to +150°C
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MASW-007588
GaAs Broadband SPDT Switch
DC - 6.0 GHz
RoHS
Compliant
MASW-007588
V1
Electrical Specifications5: TA = 25°C, Z0 = 50Ω, Vc = 0 V/3 V, Pin = 0 dBm
Parameter
Test Conditions
Units Min.
Insertion Loss
2.4 GHz
5.3 GHz
5.8 GHz
dB —
dB —
dB —
Isolation
Return Loss
IP2
IIP3
Input P-1dB
2nd Harmonic
3rd Harmonic
T-rise, T-fall
Ton, Toff
Transients
Control Current
2.4 GHz
5.3 GHz
5.8 GHz
DC - 6 GHz
Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz
2.4 GHz, Vc = 3.0 V
5.8 GHz, Vc = 3.0 V
2.4 GHz, Vc = 5.0 V
5.8 GHz, Vc = 5.0 V
Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz
2.4 GHz, Vc = 3.0 V
5.8 GHz, Vc = 3.0 V
2.4 GHz, Vc = 5.0 V
5.8 GHz, Vc = 5.0 V
2.4 GHz
5.3 GHz
5.8 GHz
2.4 GHz, Pin = +20 dBm
5.8 GHz, Pin = +20 dBm
2.4 GHz, Pin = +20 dBm
5.8 GHz, Pin = +20 dBm
10% to 90% RF and 90% to 10% RF
50% control to 90% RF, and 50% control to 10% RF
|Vc| = 3 V
dB
dB
dB
dB
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
nS
nS
mV
µA
24
23
21
Typ.
0.70
0.85
0.85
29
28
26
20
98
81
107
87
57
53
57
54
40
36
37
-72
-69
-85
-75
55
80
14
15
Max.
1.05
1.2
1.2
25
Truth Table 5,6,7
Control
V1
1
0
Control
V2
0
1
RFC– RF1 RFC—RF2
On Off
Off On
5. For positive voltage control, external DC blocking capacitors
are required on all RF ports.
6. Differential voltage, V(state 1) - V(state 0), must be
+2.7 V minimum and must not exceed +5 V.
7. 0 = 0 ± 0.2 V, 1 = +2.9 V to +5 V.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)