SPST High Isolation CATV Switch
www.DataSheet4U.com
SPDT High Isolation CATV Switch 5 - 1000 MHz
Features
• • • • • • 75 Ohm Impedance Positive Voltage...
Description
www.DataSheet4U.com
SPDT High Isolation CATV Switch 5 - 1000 MHz
Features
75 Ohm Impedance Positive Voltage Control (0 / +5 V) Low Insertion Loss: 0.60 dB at 870 MHz High Isolation: 51 dB at 870 MHz 4 mm FQFP-N 20 Lead Package 0.5 micron GaAs PHEMT Process
V1
MASWSS0068
MASWSS0068
Functional Schematic
GND GT1 GND GT2 GND
RF1 GND GND GND G1
RF2 GND GND GND G2
Description
M/A-COM’s MASWSS0068 is a GaAs PHEMT MMIC single pole double throw (SPDT) switch in a low cost 4 mm FQFP-N 20 lead package. The MASWSS0068 is ideally suited for applications where low control voltage, low insertion loss, high isolation, small size and low cost are required. Typical applications are to replace mechanical relays in CATV systems. This part can be used in all 75 ohm systems operating up to 1.0 GHz. The MASWSS0068 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability.
V1
GND
RFC GND
V2
Absolute Maximum Ratings 2
Parameter Max Input Power (5 - 1000 MHz, 5 V Control) Absolute Maximum +32 dBm ±8.5 volts -40 oC to +85 oC -65 oC to +150 oC
Ordering Information
Part Number MASWSS0068 MASWSS0068TR
1
Package
Operating Voltage Operating Temperature Storage Temperature
FQFP-N 20 Lead Plastic Package 7 inch, 1000 piece reel
2. Exceeding any one or combination of these limits may cause permanent damage to this device.
MASWSS0068TR-3000 13 inch, 3000 piece reel
MASWSS0068SMB Sample Test Board
(Include...
Similar Datasheet