Diversity Switch. MASWSS0107 Datasheet

MASWSS0107 Switch. Datasheet pdf. Equivalent

Part MASWSS0107
Description GaAs Broadband DPDT Diversity Switch
Feature www.DataSheet4U.com RoHS Compliant MASWSS0107 V1 Functional Schematic GND Rx Tx Vc4 GND Vc1 GaAs B.
Manufacture Tyco Electronics
Total Page 4 Pages
Datasheet
Download MASWSS0107 Datasheet



MASWSS0107
www.DataSheet4U.com
GaAs Broadband DPDT Diversity Switch
1.0 - 6.0 GHz
Features
802.11a + b/g Broadband Applications
Broadband Performance: 1.0 - 6.0 GHz
Low Insertion Loss: 1.0 dB @ 2.4 GHz
1.2 dB @ 6.0 GHz
High Isolation:
38 dB @ 2.4 GHz
31 dB @ 6.0 GHz
Fast Switching Speed: 0.5 µm GaAs PHEMT
Lead-Free 3 mm 12-Lead PQFN Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Reflow Compatible
Description
M/A-COM’s MASWSS0107 is a broadband GaAs
PHEMT MMIC diversity switch in a low cost,
lead-free 3 mm 12-lead PQFN package. The
MASWSS0107 is ideally suited for applications
where very small size and low cost are required.
Typical applications are for WLAN IEEE 802.11a
and 802.11b/g systems that employ two antennas
for transmit and receive diversity. Other applications
include cordless phones and base stations.Designed
for high power, this DPDT switch maintains high
linearity up to 6.0 GHz.
The MASWSS0107 can be controlled with either two
or four control signals. With four control signals
each of the four insertion paths can be controlled
individually. To control the switch with only two
signals, tie pairs of control lines together.
The MASWSS0107 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information 1
Part Number
MASWSS0107TR-3000
MASWSS0107SMB
Package
3000 piece reel
Sample Test Board (Includes 5 Samples)
1. Reference Application Note M513 for reel size information.
RoHS
Compliant
Functional Schematic
MASWSS0107
V1
Vc4
GND
Vc1
Vc3
GND
Vc2
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Pin Name
Vc4
GND
VC1
ANT1
GND
ANT2
Vc2
GND
Vc3
Rx
GND
Tx
Paddle2
Description
Control 4
Ground
Control 1
Antenna Port 1
Ground
Antenna Port 2
Control 2
Ground
Control 3
Receive Port
Ground
Transmit Port
DC and RF Ground
2. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MASWSS0107
GaAs Broadband DPDT Diversity Switch
1.0 - 6.0 GHz
RoHS
Compliant
MASWSS0107
V1
Electrical Specifications: TA = 25°C, Z0 = 50 , VC = 0 V / 3 V, 5 pF Capacitor 3
Parameter
Test Conditions
Units Min.
Typ.
Insertion Loss4
Isolation
(Input to Output)
Isolation
(Input to Output)
Isolation
(Antenna to Antenna)
(Tx - Rx)
Isolation
(Antenna to Antenna)
(Tx - Rx)
Return Loss
IP2
IP3
Input P0.1dB
Input P1dB
2nd Harmonic
3rd Harmonic
Trise, Tfall
Ton, Toff
Transients
Control Current
2.4 GHz
2 - 4 GHz
4 - 5 GHz
4.9 - 6 GHz
One Path Active
2.4 GHz
4.9 - 6 GHz
Both Paths Active
2.4 GHz
4.9 - 6 GHz
One Path Active
2.4 GHz
4.9 - 6 GHz
2.4 GHz
4.9 - 6 GHz
Both Paths Active
2.4 GHz
4.9 - 6 GHz
2.4 GHz
4.9 - 6 GHz
2.4 GHz
4.9 - 6 GHz
Two Tone, 15 dBm/tone, 5 MHz Spacing
2.4 GHz
4.9 - 6 GHz
Two Tone, 15 dBm/tone, 5 MHz Spacing
2.4 GHz
4.9 - 6 GHz
2.4 GHz
4.9 - 6 GHz
2.4 GHz
4.9 - 6 GHz
PIN = 20 dBm
2.4 GHz
5.8 GHz
PIN = 20 dBm
2.4 GHz
5.8 GHz
10% to 90% RF
90% to 10% RF
50% control to 90% RF, and 50% control to 10% RF
|Vc| = 3 V
3. For positive voltage control, external DC blocking capacitors are required on all RF ports.
4. Insertion loss can be optimized by varying the DC blocking capacitor value.
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
nS
nS
nS
mV
µA
36
1.0
1.1
1.2
1.2
38
32
33
27
31
22
30
27
25
20
25
27
21
19
91
90
53
51
27
29
33
32
-77
-75
-76
-78
80
70
97
14
1
Max.
1.3
10
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)