SPDT Switch. MASWSS0115 Datasheet

MASWSS0115 Switch. Datasheet pdf. Equivalent

Part MASWSS0115
Description GaAs SPDT Switch
Feature www.DataSheet4U.com RoHS Compliant MASWSS0115 V5 Functional Schematic C=39pF GaAs SPDT Switch DC -.
Manufacture Tyco Electronics
Datasheet
Download MASWSS0115 Datasheet



MASWSS0115
www.DataSheet4U.com
GaAs SPDT Switch
DC - 3.0 GHz
Features
Low Insertion Loss: 0.3 dB @ 2.4 GHz
Moderate Isolation: 22 dB @ 2.4 GHz
Low Power Consumption: <5 μA @ +2.3V
Lead-Free SOT-363 Package
100% Matte Tin Plating over Copper
Halogen-Free Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of SW-485
Description
M/A-COM’s MASWSS0115 is a GaAs PHEMT
MMIC single pole, double throw (SPDT) switch in a
low cost, lead-free SC-70 (SOT-363) surface mount
plastic package. The MASWSS0115 is ideally suited
for applications where very small size and low cost
are required.
Typical applications are dual band systems which
require switching between small signal components
such as filter banks, single-band LNAs, converters,
etc. This part can be used for low power, low loss
requirements in all systems operating up to 3 GHz,
including PCS, GSM, DCS, Blue Tooth, and other
receive chain applications.
The MASWSS0115 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information1
Part Number
Package
MASWSS0115
Bulk packaging
MASWSS0115TR-3000
3000 piece reel
MASWSS0115SMB
Sample Board
MASWSS0115-DIE
Separated Die on Grip Ring2
1. Reference Application Note M513 for reel size information.
2. Die quantity varies.
RoHS
Compliant
MASWSS0115
V5
Functional Schematic
C=39pF
V1
RFC
V2
RF1
PIN 1
GND
C=39pF
RF2
C=39pF
Pin Configuration
Pin No.
1
2
3
4
5
6
Function
RF1
GND
RF2
V2
RFC
V1
Description
RF Port 1
Ground
RF Port 2
Control 2
RF Input
Control 1
Absolute Maximum Ratings 3,4
Parameter
Input Power (0.5 - 3.0 GHz)
2.5 V Control
5 V Control
Voltage
Absolute Maximum
+27 dBm
+34 dBm
± 8.5 volts
Operating Temperature
-40 °C to +85 °C
Storage Temperature
-65 °C to +150 °C
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MASWSS0115
GaAs SPDT Switch
DC - 3.0 GHz
RoHS
Compliant
MASWSS0115
V5
Electrical Specifications: TA = 25°C, Vc = 0 V/2.5 V, Z0 = 50 Ohms 5
Parameter
Insertion Loss6
Isolation
Return Loss
IP2
IP3
P1dB
Trise, Tfall
Ton, Toff
Transients
Control Current
Test Conditions
DC - 1 GHz
1 - 3 GHz
DC - 1 GHz
1 - 3 GHz
0.05 - 3 GHz
Two Tone, +5 dBm/tone, 5 MHz Spacing, >50 MHz
Two Tone, +5 dBm/tone, 5 MHz Spacing, >50 MHz
Vc = 0 V/2.5 V
Vc = 0 V/3.0 V
10% to 90% RF, 90% to 10% RF
50% control to 90% RF, 50% control to 10% RF
In band
Vc = 2.5 V
Units
dB
dB
dB
dB
dB
dBm
dBm
dBm
dBm
nS
nS
mV
µA
Min.
20
Typ.
0.25
0.30
24
22
20
90
46
21
25
35
40
10
5
Max.
0.40
0.55
20
5. External DC blocking capacitors are required on all RF ports.
6. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz.
Truth Table 7,8
Control
V1
0
1
Control
V2
1
0
RFC-RF1 RFC-RF2
On Off
Off On
7. Differential voltage, V(state 1) - V(state 0), must be +2.3 V
minimum.
8. 0 = 0 V ± 0.2 V, 1 = +2.3 V to 5.0 V
Qualification
Qualified to M/A-COM specification REL-201,
Process Flow –2.
Handling Procedures
The following precautions should be observed to
avoid damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Lead-Free SC-70 (SOT-363)
Reference Application Note M538 for lead-free solder reflow
recommendations.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)