SPDT Switch. MASWSS0136 Datasheet

MASWSS0136 Switch. Datasheet pdf. Equivalent

Part MASWSS0136
Description GaAs SPDT Switch
Feature www.DataSheet4U.com RoHS Compliant MASWSS0136 V2 Functional Schematic C = 39 pF GaAs SPDT Switch D.
Manufacture Tyco Electronics
Datasheet
Download MASWSS0136 Datasheet



MASWSS0136
www.DataSheet4U.com
GaAs SPDT Switch
DC - 3.0 GHz
Features
Low Insertion Loss: 0.4 dB @ 2.4 GHz
Moderate Isolation: 27 dB @ 2.4 GHz
Low Power Consumption: 5 μA @ +3.0 V
Lead-Free SC-70 (SOT-363) Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Reflow Compatible
Description
M/A-COM’s MASWSS0136 is a GaAs PHEMT
MMIC SPDT switch in a lead-free SC-70 (SOT-363)
surface mount plastic package. The MASWSS0136
is ideally suited for applications where very small
size and low cost are required.
Typical applications are transmit / receive (Tx / Rx)
switching in linear systems such as WLAN
802.11b/g. Other applications include 1.9 GHz and
2.4 GHz DECT and linear systems operating up to
3.0 GHz.
The MASWSS0136 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information1
Part Number
MASWSS0136
MASWSS0136TR-3000
Package
Bulk packaging
3000 piece reel
MASWSS0136SMB
Sample Board
1. Reference Application Note M513 for reel size information.
RoHS
Compliant
MASWSS0136
V2
Functional Schematic
C = 39 pF
V1 RFC V2
Pin 1
RF1 GND
C = 39 pF
RF2
C = 39 pF
Pin Configuration
Pin No.
1
2
3
4
5
6
Pin Name
RF1
GND
RF2
V2
RFC
V1
Description
RF Port 1
Ground
RF Port 2
Control 2
RF Input
Control 1
Absolute Maximum Ratings 2,3
Parameter
Input Power (0.5 - 3.0 GHz)
3 V Control
Voltage
Absolute Maximum
+30 dBm
-8.5 V < Vc < +8.5 V
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MASWSS0136
GaAs SPDT Switch
DC - 3.0 GHz
RoHS
Compliant
MASWSS0136
V2
Electrical Specifications: TA = 25°C, VC = 0 V / 3 V, Z0 = 50 Ω 4
Parameter
Test Conditions
Units Min. Typ. Max.
Insertion Loss5
1.0 GHz
2.4 GHz
dB — 0.3 —
dB — 0.4 0.5
Isolation
1.0 GHz
2.4 GHz
dB — 24 —
dB 25 27 —
VSWR
0.05 - 3.0 GHz
Ratio
— 1.2:1 —
IP2
Two Tone, +5 dBm / Tone, 5 MHz Spacing
2.4 GHz
dBm — 80 —
IP3
Two Tone, +5 dBm / Tone, 5 MHz Spacing
2.4 GHz
dBm — 48 —
Linear Pout
2.5 GHz, OFDM, QAM-64,54Mbps, EVM=2.5%
3.0 V
3.3 V
5.0 V
dBm
dBm
dBm
— 22.5 —
— 24.0 —
— 28.5 —
P1dB
— dBm — 28 —
Trise, Tfall
10% to 90% RF and 90% to 10% RF
nS — 35 —
Ton, Toff
50% control to 90% RF, 50% control to 10% RF
nS — 40 —
Transients
— mV — 10 —
Current
VC = 3.0 V
µA — 5 10
4. For positive voltage control, external DC blocking capacitors are required on all RF ports.
5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz – 1.0 GHz, 39 pF for 0.5 - 3.0 GHz.
Truth Table 6,7
Control
V1
Control
V2
01
RFC-RF1
On
RFC-RF2
Off
1 0 Off On
6. Differential voltage, V (state 1) - V (state 0), must be +2.3 V
minimum and must not exceed 8.5 V.
7. 0 = 0 V ± 0.2 V, 1 = +2.5 V to 5.0 V
Lead-Free SC-70 (SOT-363)
Qualification
Qualified to M/A-COM specification REL-201,
Process Flow –2.
Handling Procedures
The following precautions should be observed to
avoid damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
Reference Application Note M538 for lead-free solder reflow
recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)