SPDT Switch. MASWSS0176 Datasheet

MASWSS0176 Switch. Datasheet pdf. Equivalent

Part MASWSS0176
Description GaAs SPDT Switch
Feature www.DataSheet4U.com RoHS Compliant MASWSS0176 V1 Functional Schematic C=39pF GaAs SPDT Switch 0.05.
Manufacture Tyco Electronics
Datasheet
Download MASWSS0176 Datasheet



MASWSS0176
www.DataSheet4U.com
GaAs SPDT Switch
0.05 - 3 GHz
Features
Low Insertion Loss: 0.35 dB @ 2.4 GHz
Moderate Isolation: 21 dB @ 2.4 GHz
Low Current Consumption: 5 µA @ 2.5 V
Lead-Free SOT-26 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MASWSS0005
Description
M/A-COM’s MASWSS0176 is a GaAs PHEMT
MMIC single pole, double throw (SPDT) switch in a
low cost, lead-free SOT-26 surface mount plastic
package. The MASWSS0176 is ideally suited for
applications where small size and low cost are
required.
Typical applications are dual band systems which
require switching between small signal components
such as filter banks, single-band LNAs, converters,
etc. This part can be used for low power, low loss
requirements in all systems operating up to 3 GHz,
including PCS, GSM, DCS, Satellite Radio, Blue
Tooth, and other receive chain applications.
The MASWSS0176 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information
Part Number
MASWSS0176
MASWSS0176TR-3000
MASWSS0176SMB
Package
Bulk Packaging
3000 piece reel
Sample Board
Note: Reference Application Note M513 for reel size
information.
RoHS
Compliant
MASWSS0176
V1
Functional Schematic
C=39pF
V1
RFC
V2
RF1
PIN 1
GND
C=39pF
RF2
C=39pF
Pin Configuration
Pin No.
1
2
3
4
5
6
Function
RF1
GND
RF2
V2
RFC
V1
Description
RF Port 1
Ground
RF Port 2
Control 2
RF Input
Control 1
Absolute Maximum Ratings1,2
Parameter
Absolute Maximum
Input Power @ 2.5 V Control
+26 dBm
Operating Voltage
+8.5 V
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MASWSS0176
GaAs SPDT Switch
0.05 - 3 GHz
RoHS
Compliant
MASWSS0176
V1
Electrical Specifications: TA = 25°C, Vc = 0 V / +2.5 V, Z0 = 50 Ohms3,4
Parameter
Insertion Loss
Isolation
Return Loss
IP2
IP3
P1dB
Trise, Tfall
Ton, Toff
Transients
Control Current
Test Conditions
0.05 - 1.0 GHz
1.0 - 3.0 GHz
0.05 - 1.0 GHz
1.0 - 3.0 GHz
0.05 - 3.0 GHz
Two Tone +5 dBm, 5 MHz Spacing
Two Tone +5 dBm, 5 MHz Spacing
10% to 90% RF and 90% to 10% RF
50% Vc to 10% RF, 50% Vc to 90% RF
In-Band
Vc= 2.5 V
Units
dB
dB
dB
dB
dB
dBm
dBm
dBm
nS
nS
mV
µA
Min
20
Typ
0.3
0.35
24
21
20
62
45
21
35
40
10
5
Max
0.4
0.55
20
3. For positive voltage control, external DC blocking capacitors are required on all RF ports.
4. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz.
Truth Table5
Lead-Free SOT-26
Control
V1
Control
V2
RFC-RF1
0 1 On
1 0 Off
5. 0 = 0 V to 0.2 V, 1 = +2.5 V to 5 V
RFC-RF2
Off
On
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
Reference Application Note M538 for lead-free solder reflow
recommendations.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)