Power Switch. MASWSS0204 Datasheet

MASWSS0204 Switch. Datasheet pdf. Equivalent

Part MASWSS0204
Description GaAs SPDT 2.7 V High Power Switch
Feature www.DataSheet4U.com RoHS Compliant MASWSS0204 V1 Functional Block Diagram GaAs SPDT 2.7 V High Pow.
Manufacture Tyco Electronics
Datasheet
Download MASWSS0204 Datasheet



MASWSS0204
www.DataSheet4U.com
GaAs SPDT 2.7 V High Power Switch
DC - 3.0 GHz
Features
Low Voltage Operation: 2.7 V
High IP3: +56 dBm
Low Insertion Loss: 0.30 dB at 1 GHz
High Isolation: 25 dB at 1 GHz
0.5 micron GaAs PHEMT Process
Lead-Free SC70 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MASWSS0117
Description
M/A-COM’s MASWSS0204 is a GaAs PHEMT
MMIC single pole double throw (SPDT) high power
switch in a low cost SC70 six lead package. The
MASWSS0204 is ideally suited for applications
where high power, low control voltage, low insertion
loss, high isolation, small size and low cost are
required.
Typical applications are for CDMA handset
systems that connect separate transceiver and/or
GPS functions to a common antenna, as well as
other related handset and general purpose
applications. The MASWSS0204 can be used in all
systems operating up to 3 GHz requiring high power
at low control voltage.
The MASWSS0204 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
RoHS
Compliant
MASWSS0204
V1
Functional Block Diagram
39 pF
RF1
V1
GND
RFC
39 pF
39 pF
Pin 6
RF2
V2
Pin 1
Pin Configuration
Pin No.
1
2
3
4
5
6
Pin Name
V2
RFC
V1
RF1
GND
RF2
Description
Vcontrol 2
RF Common
Vcontrol 1
RF Port 1
RF Ground
RF Port 2
MASWSS0204 orientation in tape
Ordering Information
Part Number
MASWSS0204
Package
Bulk Packaging
MASWSS0204TR-3000
3000 piece reel
MASWSS0204SMB
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
MASWSS0204 Device Marking
PIN 1
PART NUMBER
XXW
DATE CODE
PIN 6
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MASWSS0204
GaAs SPDT 2.7 V High Power Switch
DC - 3.0 GHz
RoHS
Compliant
MASWSS0204
V1
Electrical Specifications: TA = 25°C, Vc = 0 V/2.7 V, Z0 = 50 Ohms 1
Parameter
Insertion Loss2
Test Conditions
DC – 1 GHz
1 – 2 GHz
2 - 3 GHz
Units
dB
dB
dB
Min.
Typ.
0.30
0.35
0.35
Max.
0.65
Isolation
DC – 1 GHz
1 – 2 GHz
2 - 3 GHz
dB 23 25 —
dB — 19 —
dB — 15 —
Return Loss
DC – 3 GHz
dB — 20 —
IP3
825 MHz
dBm — 56 —
Two Tone, +24 dBm Total Pin, 5 MHz Spacing
Cross Modulation
For Cell Band: Two-tone signal input: Tx1 = +22 dBm @
dBm
-99 —
820 MHz, Tx2 = +22 dBm @ 821 MHz,
RX interfere = -23 dBm @ 869 MHz.
For PCS Band: Two-tone signal input: Tx1 = +18 dBm @
dBm
-94 —
1880 MHz, Tx2 = +18 dBm @ 1881 MHz,
RX interfere = -23 dBm @ 1960 MHz.
P0.1dB
1 GHz
dBm — 38 —
Trise, Tfall
10% to 90% RF, 90% to 10% RF
nS — 70 —
Ton, Toff
50% control to 90% RF,
50% control to 10% RF
nS — 100 —
Transients
In Band
mV — 25 —
Control Current
Vc = 2.7 V
µA — 5 20
1. For positive voltage control, external DC blocking capacitors are required on all RF ports.
2. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz.
Absolute Maximum Ratings 3,4
Parameter
Absolute Maximum
Input Power
(0.5 - 3 GHz, 3 V Control)
+38 dBm
Operating Voltage
+8.5 volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
Truth Table 5,6,7
V1 V2 ANT– RF1 ANT - RF2
1 0 On Off
0 1 Off On
5. For positive voltage control, external DC blocking capacitors
are required on all RF ports.
6. Differential voltage, V(state 1) - V(state 0), must be +2.7 V
minimum, but must not exceed 8.5 V.
7. 0 = -5 V to +2.3 V, 1 = -2.3 V to +5 V.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)