Synthesiser. MASY-008215-243000 Datasheet

MASY-008215-243000 Synthesiser. Datasheet pdf. Equivalent

Part MASY-008215-243000
Description Synthesiser
Feature www.DataSheet4U.com Synthesiser, SMT, 3.15 - 5.55 GHz, 2.5 MHz step. Features • • • • Full Integrat.
Manufacture Tyco Electronics
Datasheet
Download MASY-008215-243000 Datasheet



MASY-008215-243000
www.DataSheet4U.com
Synthesiser, SMT, 3.15 - 5.55 GHz, 2.5 MHz step.
MASY-008215-243000
V2
Features
Full Integration: VCO, PLL, Loop Filter
Wide Bandwidth (> 2GHz)
Fast Switching (=< 50µs)
Low noise: Typ -110 dBc/Hz @ 100kHz offset
Description
This synthesiser is designed for demanding wide
bandwidth applications.
The fully integrated design incorporates a VCO, PLL
and loop filter in a convenient surface mount pack-
age. The lid is fully solder attached to provide opti-
mum electrical shielding.
Programming is via 3 Wire SPI (Serial Peripheral
Interface.)
Actual product finish may vary from illustration
Electrical Specification
(Applies over the frequency range @ +25 °C, output and input load impedance of 50 ohms. Unless otherwise
stated limits & conditions are indicated values.)
Parameter
Min Typ Max Units Condition
Frequency
3.15 4.35 5.55 GHz
Over TOP - See Note 1.
Step Size
2.5 MHz
RF Output power
0 +3 +6 dBm
Output Return Loss
Settling Time
12 dB
50 µs To within ± 10kHz
Output Harmonic
Spurious
-20 -15 dBc
-63 -60 dBc
Phase Noise
(Noise <1kHz offset dependent upon
external reference)
External Ref
-90
-85
-110
100
-75
-75
-100
dBc/Hz
dBc/Hz
dBc/Hz
MHz
Offset 1kHz
Offset 10kHz
Offset 100kHz
See Note 2.
Lock Monitor
2.0 2.5 3.3 Volt Out of Lock
0 0.1 0.8 Volt In Lock
VPLL DC Supply voltage
VPLL DC Current
VVCO DC Supply voltage
VVCO DC Current
+23.75 +24 +24.25 Volt
10 15 mA
+9.75
+10 +10.25 Volt
100 150 mA
Vcc = +24V
Vcc = +10 V
Note 1: TOP = -40°C ~ +85°C Case operating temperature
Note 2: External Reference, 0dBm min input power, with stability of 20 ppm (max) over temperature.
Reference phase noise: -98 dBc/Hz @ 10 Hz, -110 dBc/Hz @ 100 Hz, -120 dBc/Hz @ 1 kHz
Note 3: Programming 3 Wire SPI (Serial Peripheral Interface) - contact factory for details.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.comfor additional data sheets and product information.



MASY-008215-243000
Synthesiser, SMT, 3.15 - 5.55 GHz, 2.5 MHz step.
Pin Assignment
Pin Number
2
8
10
12
16
18
20
21
25
All other pins
Mechanical
Assignment
RF_Out
Clock
Data
LE (Load Enable)
LD (Lock Detect)
+10V V CC
+24V V CC
NC (No Connection)
REF_IN (Reference Input)
GND
MASY-008215-243000
V2
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.comfor additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)