Synthesizer. MAVC-060000-530768 Datasheet

MAVC-060000-530768 Synthesizer. Datasheet pdf. Equivalent

Part MAVC-060000-530768
Description Synthesizer
Feature www.DataSheet4U.com Synthesizer , SMT Fixed Frequency, 768 MHz Features ♦ ♦ ♦ ♦ ♦ RoHS Compliant Fu.
Manufacture Tyco Electronics
Datasheet
Download MAVC-060000-530768 Datasheet



MAVC-060000-530768
www.DataSheet4U.com
Synthesizer , SMT
Fixed Frequency, 768 MHz
Features
RoHS Compliant
Fully Integrated VCO, PLL, Loop Filter
High Performance, Low Cost
Miniature SMT Package (LSM6)
Includes microcontroller for PLL programming
Description
This synthesizer design integrates a high performance VCO, PLL,
IC, discrete loop filter and microcontroller in a surface mount pack-
age. This SMT package provides electrical shielding, easy PCB
assembly and repeatable performance. The synthesizer is de-
signed for use in wireless base stations.
M/A-COM synthesizers are manufactured in an ISO9001 certified
facility, incorporating surface mount assembly and automated elec-
trical testing. This ensures consistent electrical performance and
quality over volume production quantities.
MAVC-060000-530768
Rev: A
Electrical Specifications1:
TA = +25°C, Z0 = 50 Ohms, Vcc1 = 5V, Vcc2 = 3.3V.
Parameter
Frequency Range
RF Output Power
Phase Noise
Harmonic Suppression
Integrated Phase Noise +
Spurs
Test Conditions
Over Top 2
Single ended output
SSB at 5.5 kHz offset from carrier
SSB at 10 kHz offset from carrier
SSB at 100 kHz offset from carrier
SSB at 1 MHz offset from carrier
SSB at 3 MHz offset from carrier
2nd and 3rd
At 100 kHz, 11 kHz bandwidth
At 1 MHz, 1 MHz bandwidth
At 3 MHz, 1 MHz bandwidth
Reference breakthrough, 1 MHz bandwidth
Integrated Phase Noise
Settling Time
VCO Supply Current (ICC1)
PLL Supply Current (ICC2)
VCO Power Supply (VCC1)
PLL Power Supply (VCC2)
100Hz to 5.5kHz, double sided integration
Phase error < 10 degrees
Recommended operating condition
Recommended operating condition
Recommended operating condition
Recommended operating condition
Units
MHz
dBm
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc
dB
dB
dB
dB
dB
ms
mA
mA
V
V
Min
0
+4.75
+2.7
Typ
768.0
+3
-25
-60
5
47
13
+5.00
+3.3
Max
+6
-96
-102
-122
-138
-148
-20
-82
-78
-88
-88
-56
60
15
+5.25
+3.6
1. All specification limits are indicated values @ +25 ºC and apply over Fout unless otherwise stated.
2. See “Absolute Maximum Ratings” for Top.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to
the product(s) or information contained herein without notice. M/A-
COM makes no warranty, representation or guarantee regarding the
suitability of its products for any particular purpose, nor does M/A-
COM assume any liability whatsoever arising out of the use.
or application of any product(s) or information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



MAVC-060000-530768
Synthesizer , SMT
Fixed Frequency, 768 MHz
MAVC-060000-530768
Electrical Specifications1: (cont’d)
Parameter
Test Conditions
Units
Min
Typ Max
Reference Frequency (FR)
PLL Lock Monitor Output
1.0 V pp ± 0.2V
Max phase noise on reference:
100Hz: -105 dBc/Hz
1kHz: -130 dBc/Hz
10kHz: -145 dBc/Hz
MHz
Locked = VCC2 - 0.4 Min , Unlocked = 0.4V Max
52.0
Pin Configuration
Pin No.
1
2
3
4
5
6
7
Function
VCC2
GND
Ref I/P
GND
VCC1
GND
RF O/P
Pin No.
8
9
10
11
12
13
14
Function
GND
Lock Detect
NC
NC
NC
GND
GND
Functional Block Diagram
1
10nF
2
VCC2
GND
3
REF IN
4
GND
5
10nF
6
VCC1
GND
TO CONTROLLER
13
GND
LOAD ENANB/LCE
12
11
DNAT/CA
CLONC/KC 10
LOCK DETECT 9
GND
8
GND
14
RF OUT
7
50R
1. The diagram above shows a typical application.
2. The Reference input and RF output are internally AC cou-
pled.
3. The diagram applies when digital lock detect is selected. For
analog open-drain mode, a filter is required.
Absolute Maximum Ratings
TA = +25°C
Parameter
Absolute Maximum
VCO Supply Voltage (VCC1)
PLL Supply Voltage (VCC2)
Reference Frequency Level
-0.3V to 6.5 V
-0.3V to 6.5 V
-0.3V to 6.5 V
Operating Temperature
-40°C to +85°C
Storage Temperature
-45°C to +120°C
Solder Assembly
Temperature
Weight
See App Note M2032
3.0 grams
1. Operation of this device above any one of these parameters
may cause permanent damage.
2. Static sensitive, observe appropriate handling precautions.
Environmental Specifications
Devices are designed to function after exposure to the
shock, vibration, thermal shock and moisture conditions
typically encountered in base station and other infra-
structure environments.
Ordering Information
Part Number
MAVC-060000-530768
Package
Tape and Reel (300/Reel) 1
1. See application note M513.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to
the product(s) or information contained herein without notice. M/A-
COM makes no warranty, representation or guarantee regarding the
suitability of its products for any particular purpose, nor does M/A-
COM assume any liability whatsoever arising out of the use.
or application of any product(s) or information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)