SPST Switch. SW-214-PIN Datasheet

SW-214-PIN Switch. Datasheet pdf. Equivalent

Part SW-214-PIN
Description GaAs SPST Switch
Feature www.DataSheet4U.com RoHS Compliant SW-214-PIN V3 Functional Block Diagram GaAs SPST Switch, DC - 3.
Manufacture Tyco Electronics
Total Page 3 Pages
Datasheet
Download SW-214-PIN Datasheet



SW-214-PIN
www.DataSheet4U.com
GaAs SPST Switch,
DC - 3 GHz
Features
Fast Switching Speed: 6 nS Typical
Ultra Low DC Power Consumption
Terminated
50 Ohm Nominal Impedance
MIL-STD-883 screening available
Description
RoHS
Compliant
SW-214-PIN
V3
Functional Block Diagram
Ordering Information
Part Number
SW-214-PIN
Package
FP-13
Note: Reference Application Note M513 for reel size
information.
Note: Die quantity varies.
Truth Table
Control Input
AB
Hi Lo
Lo Hi
Condition of Switch
RF1 to RF2
On
Off
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



SW-214-PIN
GaAs SPST Switch,
DC - 3 GHz
Electrical Specifications: TA = 25°C 1,2,3
Parameter
Test Conditions
RoHS
Compliant
SW-214-PIN
V3
Frequency Units Min Typ Max
Insertion Loss
— DC - 3 GHz dB — — 1.3
DC - 2 GHz dB — — 1.2
DC - 1 GHz dB — — 0.9
DC - 0.5 GHz
dB
0.9
Isolation
— DC - 3 GHz dB 25 — —
DC - 2 GHz dB 38 — —
DC - 1 GHz dB 45 — —
DC - 0.5 GHz
dB
50
VSWR
DC - 3 GHz
Ratio
— 2.0:1
DC - 2 GHz
Ratio
— 1.7:1
DC - 1 GHz
Ratio
— 1.3:1
DC - 0.5 GHz
Ratio
— 1.3:1
Trise, Tfall
Ton, Toff
Transients
50% CTL to 90/10% RF
In-Band
— nS — 3 —
— nS — 6 —
— mV — 30 —
1 dB Compression
Control Voltage 0/-5 VDC
Control Voltage 0/-8 VDC
0.5 - 3 GHz dBm — +27 —
0.05 GHz
dBm — +21 —
0.5 - 3 GHz dBm — +33 —
0.05 GHz
dBm — +26 —
IP2
For two-tone Input power up to +13 dBm
0.5 - 3 GHz
dBm
+68
0.05 GHz
dBm — +62 —
IP3
For two-tone Input power up to +13 dBm
0.5 - 3 GHz
dBm
+46
0.05 GHz
dBm — +40 —
Control Voltages
VIN Low: 0 to –0.2V
VIN High: -5V @ 50 µA Typ to –8V
— — — — 20 µA
— — — — 300 µA
1. All specifications apply with 50 ohm impedance connected to all RF ports with 0 and –5 VDC control voltages.
2. Faster switching speed can be achieved with enhanced driver waveform.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)