SW-217

www.DataSheet4U.com GaAs SPDT Switch 5 - 2000 MHz Features q q q SW-217 V2.00 DI-1 CTL 0.87 (22.1 Ϯ 0.5) RF IN q q Low Insertion Loss, 1.0 dB Typical Fast Switching Speed, 20 ns Typical Ultra Low DC Power Consumption 0.12mA Typical Integral TTL Driver MIL-STD-883 Screening Available (From -55°C to +85°C) 5-2000 MHz 1.5 dB Max 1.2 dB Max 1.1 dB Max 1.8:1 dB Max 1.4:1 dB Max 1.25:1 dB Max 40 dB Min 45 dB Min 53 dB Min 0.018 ±0.005 (0.46 ±0.13) DIA. 14 PINS – + RF1 RF2 0.200 (5.1) MAX Guaranteed Specifications* Frequency Range Insertion Loss 5-2000 MHz 5-1000 MHz 5-500 MHz 5-2000 MHz 5-1000 MHz 5-500 MHz 5-2000 MHz 5-1000 MHz 5-500 MHz 0.100 (2.5) TYP 0.120 (3.0) MIN 0.300 (7.6) 0.50 (12.7 Ϯ 0.5) VSWR 0.10 (2.5 Ϯ0.5) 0.13 (3.3Ϯ0.5) Isolation Dimensions in ( ) are in mm. Unless otherwise noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.): 0.14 OUNCES 4 GRAMS Operating Characteristics Impedance Switching Characteristics t RISE, tFALL t ON, tOFF (50% CTL to 90/10% RF) Transients (In-Band) Input Power for 1 dB Compression 500-2000 MHz 50 MHz Intermodulation Intercept Point (for two-tone input power up to +13 dBm) Intercept Points 500-2000 MHz 50 MHz Bias Power IP2 +68 +60 IP3 +46 +40 dBm Typ dBm Typ 50 Ohms Nominal (TTL) 7 ns 20 ns 100 mV +27 dBm Typ +21 dBm Typ +5 VDC @ 0.12 mA Typ, 1 mA Max * All specifications apply when operated with bias voltages of +5 VDC and 50 ohm impedance at all RF ports. Ordering Information Part No. SW-217 ...