SP4T Switch. SW-415-PIN Datasheet

SW-415-PIN Switch. Datasheet pdf. Equivalent

Part SW-415-PIN
Description Matched GaAs SP4T Switch
Feature www.DataSheet4U.com RoHS Compliant SW-415-PIN V3 Functional Block Diagram Matched GaAs SP4T Switch.
Manufacture Tyco Electronics
Total Page 3 Pages
Datasheet
Download SW-415-PIN Datasheet



SW-415-PIN
www.DataSheet4U.com
Matched GaAs SP4T Switch,
DC - 2 GHz
Features
Low Insertion Loss
Fast Switching Speed, 200 ns Typical
Low DC Power Consumption
Integral CMOS Decoder/Driver
50 Ohm Nominal Impedance
Description
RoHS
Compliant
SW-415-PIN
V3
Functional Block Diagram
Ordering Information
Part Number
SW-415-PIN
Package
FP-25
Note: Reference Application Note M513 for reel size
information.
Note: Die quantity varies.
Absolute Maximum Ratings 3
Parameter
Max Input Power
0.05 GHz
0.5 - 2.0 GHz
Control Voltage
Operating Temperature
Storage Temperature
Absolute Maximum
+24 dBm
+30 dBm
+5V, -8.5V
-55°C to +125°C
-65°C to +150°C
3. Operation of this device above any one of these parameters
may cause permanent damage.
Truth Table
Control Inputs
Condition of Switch
“1” = Logic High
(CMOS)
CMOS 2 CMOS 1
RF Common to Each RF
Port
RF1 RF2 RF3 RF4
0 0 ON OFF OFF OFF
0 1 OFF ON OFF OFF
1 0 OFF OFF ON OFF
1 1 OFF OFF OFF ON
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.



SW-415-PIN
Matched GaAs SP4T Switch,
DC - 2 GHz
RoHS
Compliant
Electrical Specifications: TA = -55°C to +85°C 1
Parameter
Test Conditions
Frequency
Units Min
SW-415-PIN
V3
Typ Max
Insertion Loss
VSWR
Isolation
Trise, Tfall
Ton, Toff
Transients
1 dB Compression
10% to 90% RF
50% CTL to 90/10% RF
In-band
Input Power
DC - 2.0 GHz
dB
1.8
DC - 1.0 GHz
dB
1.5
DC - 0.5 GHz
dB
1.2
DC - 2.0 GHz
DC - 1.0 GHz
DC - 0.5 GHz
Ratio
Ratio
Ratio
— 1.8:1
— 1.8:1
— 1.4:1
DC - 2.0 GHz
dB
37
DC - 1.0 GHz
dB
43
DC - 0.5 GHz
dB
45
— nS — 50 —
— nS — 200 —
— mV — 15 —
0.5 - 2.0 GHz
dBm
+27
0.05 GHz
dBm — +17 —
IP2
For two tone input power up to +5 dBm
0.5 - 2.0 GHz
dBm
+60
0.05 GHz
dBm — +45 —
IP3
For two tone input power up to +5 dBm
0.5 - 2.0 GHz
dBm
+46
0.05 GHz
dBm — +35 —
Bias Power
-5 VDC
+5 VDC
mA — —
5
mA — —
1
Vin Low (0)
Vin High (1)
0.0 to 1.5V
3.5 to 5.0V
µA — —
1
µA — —
1
1. All specifications apply with 50 ohm impedance at all RF Ports.
2. Contact the factory for standard or customer screening requirements.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)