UHF RFID reader module
www.DataSheet4U.com
WJR7000
Preliminary
Key Features
• • • • • •
•
1/2 Watt Gen 2 Dense Reader Mode Multi-protocol S...
Description
www.DataSheet4U.com
WJR7000
Preliminary
Key Features
1/2 Watt Gen 2 Dense Reader Mode Multi-protocol Support Fast 40/240 KHz Miller Sub-Carrier Data Rate Dynamic RF Output Power: 18 to 30dBm Range Two Antenna Ports: Near or Far-field capable World Wide Capability: Configurable to meet country specific RFID UHF requirements* Read Range up to 20ft**
WJ Communications’ WJR7000 UHF RFID reader module is designed to enable RFID UHF Gen2 capability for handheld readers, printers and forklift readers. This allows original equipment manufacturers, value added resellers and system integrators to reach a broad spectrum of end customers. WJ’s capability to configure WJR7000 modules for different country specific UHF frequency requirements, to provide 1/2 watt Gen2 dense reader mode and to implement a 40/240 KHz data rate will enable high performance solutions that can be deployed worldwide. The WJR7000 is backwards compatible with the MPR7000.
The 0.5-watt (+27dBm) WJR7000 reader module operates in the UHF frequency band (902-928 MHz) used by North America and some AsiaPacific regions. The reader includes the RF, digital circuitry and embedded firmware required for ISO18000-6C (UHF Gen2) and Class 0/0+ standards. The API command set enables customers to control RF output power per command according to their application needs. WJ provides free demonstration software for quick evaluation, an open source DLL and API for simple integration and standard 3.3-5V CMOS serial...
Similar Datasheet