56F8166

www.DataSheet4U.com 56F8366/56F8166 Data Sheet Preliminary Technical Data 56F8300 16-bit Digital Signal Controllers MC56F8366 Rev. 6 01/2007 freescale.com Document Revision History Version History Rev 0 Rev 1.0 Rev 2.0 Pre-release, Alpha customers only Initial Public Release Added output voltage maximum value and note to clarify in Table 10-1; also removed overall life expectancy note, since life expectancy is dependent on customer usage and must be determined by reliability engineering. Clarified value and unit measure for Maximum allowed PD in Table 10-3. Corrected note about average value for Flash Data Retention in Table 10-4. Added new RoHS-compliant orderable part numbers in Table 13-1. Deleted formula for Max Ambient Operating Temperature (Automotive) and Max Ambient Operating Temperature (Industrial) and corrected Flash Endurance to 10,000 in Table 10-4. Added RoHS-compliance and “pb-free” language to back cover Added information/corrected state during reset in Table 2-2. Clarified external reference crystal frequency for PLL in Table 10-14 by increasing maximum value to 8.4MHz. Replaced “Tri-stated” with an explanation in State During Reset column in Table 2-2. Added the following note to the description of the TMS signal in Table 2-2: Note: Always tie the TMS pin to VDD through a 2.2K resistor. Added the following note to the description of the TRST signal in Table 2-2: Note: For normal operation, connect TRST directly to VSS. If the design is to be used in...