HIGH PERFORMANCE DUART
www.DataSheet4U.com
JUNE 2006
PRELIMINARY
XR16V2651
REV. P1.0.0
HIGH PERFORMANCE DUART WITH 32-BYTE FIFO AND POWERSAV...
Description
www.DataSheet4U.com
JUNE 2006
PRELIMINARY
XR16V2651
REV. P1.0.0
HIGH PERFORMANCE DUART WITH 32-BYTE FIFO AND POWERSAVE
GENERAL DESCRIPTION
The XR16V26511 (V2651) is a high performance dual universal asynchronous receiver and transmitter (UART) with 32 byte TX and RX FIFOs. The device operates from 2.25 to 3.6 volts with 5 Volt tolerant inputs and is pin-to-pin and software compatible to Exar’s XR16V2551 and XR16L2551. The device includes 2 additional capabilities over the XR16V2650: Intel and Motorola data bus selection and a “PowerSave” mode to further reduce sleep current to a minimum during sleep mode. It supports the Exar’s enhanced features of selectable FIFO trigger level, automatic hardware (RTS/CTS) and software flow control, and a complete modem interface. An internal loopback capability allows system diagnostics. Independent programmable fractional baud rate generators are provided in each channel to select data rates up to 16 Mbps at 3.3 Volt and 4X sampling clock. The V2651 is available in 48pin TQFP and 32-pin QFN packages.
NOTE: 1 Covered by U.S. Patent #5,649,122
FEATURES
2.25 to 3.6 Volt Operation 5 Volt Tolerant Inputs Pin-to-pin compatible to Exar’s XR16L2751 in the
48-TQFP package
Two independent UART channels
■ ■
Register set identical to 16V2650 Data rate of up to 16 Mbps at 3.3 V, and 12.5 Mbps at 2.5 V with 4X sampling rate Fractional Baud Rate Generator Transmit and Receive FIFOs of 32 bytes Selectable TX and RX FIFO Trigger Levels Auto...
Similar Datasheet