HIGH PERFORMANCE DUART
www.DataSheet4U.com
JUNE 2006
PRELIMINARY
XR16V2752
REV. P1.0.0
HIGH PERFORMANCE DUART WITH 64-BYTE FIFO
GENERAL DES...
Description
www.DataSheet4U.com
JUNE 2006
PRELIMINARY
XR16V2752
REV. P1.0.0
HIGH PERFORMANCE DUART WITH 64-BYTE FIFO
GENERAL DESCRIPTION
The XR16V27521 (V2752) is a high performance dual universal asynchronous receiver and transmitter (UART) with 64 byte TX and RX FIFOs. The device operates from 2.25 to 3.6 volts with 5 Volt tolerant inputs and is pin-to-pin compatible to Exar’s ST16C2552, XR16L2552 and XR16L2752. The V2752 register set is identical to the XR16L2752 and is compatible to the ST16C2552 and the XR16C2852 enhanced features. It supports the Exar’s enhanced features of programmable FIFO trigger level and FIFO level counters, automatic hardware (RTS/CTS) and software flow control, automatic RS-485 half duplex direction control output and a complete modem interface. Onboard registers provide the user with operational status and data error flags. An internal loopback capability allows system diagnostics. Independent programmable baud rate generators are provided in each channel to select data rates up to 8 Mbps at 3.3 Volt and 8X sampling clock. The V2752 is available in 44-pin PLCC and 32pin QFN packages.
NOTE: 1 Covered by U.S. Patent #5,649,122
FEATURES
2.25 to 3.6 Volt Operation 5 Volt Tolerant Inputs Pin-to-pin compatible to Exar’s XR16L2752 Two independent UART channels
■ ■
Register set compatible to XR16L2752 Data rate of up to 8 Mbps at at 3.3 V, and 6.25 Mbps at 2.5 V with 8X sampling rate Fractional Baud Rate Generator Transmit and Receive FIFOs of 64 by...
Similar Datasheet