www.DataSheet4U.com
SDA263AF-3 thru SDA263GF-3
75 AMPS 50 - 1000 VOLTS FAST RECOVERY THREE PHASE BRIDGE RECTIFIER
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information 1/ SDA263 __ __ __ __
¦ ¦ ¦ ¦ ¦ ¦ ¦ ¦ ¦ ¦ + ¦ ¦ ¦ ¦ ¦ ¦ ¦ ¦ + ¦ + Screening ¦ __ = Not Screened ¦ TX = TX Level ¦ TXV = TXV ¦ S = S Level ¦ + Bridge Type -3 = Three Phase
2/
• • • • • • • • • • •
Reverse Recovery
F = Fast
Peak Inverse Voltage (per leg)
A = 50V, B = 100V, C = 200V, D = 400V, E = 600V, F = 800V, G = 1,000V.
3/
FEATURES: Fast Reverse Recovery Time 200 ns Max ° Average Output Current 75 Amps @ 50 C PIV 50 to 1000 Volts Per Leg ° Maximum Thermal Resistance 1.0 C/W ° Operating & Storage Temperature -55 C to ° +150 C Hermetically Sealed Diode Cells Threaded Holes for Ease of Installation Electrically Insulated Aluminum Case Available in Faster Recovery Versions Available in Higher Voltages TX, TXV, and S-Level Screening Available
ELECTRICAL CHARACTERISTICS
Peak Inverse Voltage (per leg) Sine Wave Reverse4/ RMS Recovery Input Time Voltage Max.
Part Number
Average DC Output Current TC =Case Temp
Peak Forward Surge Current (1 Cycle)
Peak Repetitive Forward Current
Maximum Forward Voltage (per leg) @ 10 ADC
Maximum Reverse Current (per leg) @ PIV
Symbol Units Conditions
SDA263AF-3 SDA263BF-3 SDA263CF-3 SDA263DF-3 SDA263EF-3 SDA263FF-3 SDA263GF-3
PIV Volts
50 100 200 400 600 800 1000
Vr Volts
35 70 140 280 420 560 700
Trr ns Max
200 200 200 200 200 200 200
IF (AV) Amps 50o C 100o C
75 75 75 75 75 75 75 54 54 54 54 54 54 54
IFSM Amps
375 375 375 375 375 375 375
IFRM Amps
125 125 125 125 125 125 125
VF Volts 25o C
1.2 1.2 1.2 1.2 1.2 1.2 1.2 5 5 5 5 5 5 5
IR µA 100o C
100 100 100 100 100 100 100
SDA263AF-3 through SDA263GF-3 Package: NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp .
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RA0064A
DOC
.