DatasheetsPDF.com

ACHL1 Dataheets PDF



Part Number ACHL1
Manufacturers Abracon Corporation
Logo Abracon Corporation
Description HCMOS/ TTL COMPATIBLE FULL-SIZE AND HALF-SIZE DIP CRYSTAL CLOCK OSCILLATORS
Datasheet ACHL1 DatasheetACHL1 Datasheet (PDF)

www.DataSheet4U.com CRYSTAL CLOCK OSCILLATORS 2.5Vdc • HCMOS/ TTL COMPATIBLE FULL-SIZE AND HALF-SIZE DIP ACOL 1 and ACHL1 FEATURES: 20.2 x 12.6 x 5.08 mm APPLICATIONS: • Tristate Enable / Disable option. • HCMOS and TTL compatible. • Anti-Static packaging tubes. • Low voltage 2.5Vdc. • Tight symmetry option. • Low power. • Clock signal sources for digital chips and microprocessors. • Low power applications. STANDARD SPECIFICATIONS STANDARD SPECIACOL1 FIC(14 AT IONS Package Type DIP) and .

  ACHL1   ACHL1



Document
www.DataSheet4U.com CRYSTAL CLOCK OSCILLATORS 2.5Vdc • HCMOS/ TTL COMPATIBLE FULL-SIZE AND HALF-SIZE DIP ACOL 1 and ACHL1 FEATURES: 20.2 x 12.6 x 5.08 mm APPLICATIONS: • Tristate Enable / Disable option. • HCMOS and TTL compatible. • Anti-Static packaging tubes. • Low voltage 2.5Vdc. • Tight symmetry option. • Low power. • Clock signal sources for digital chips and microprocessors. • Low power applications. STANDARD SPECIFICATIONS STANDARD SPECIACOL1 FIC(14 AT IONS Package Type DIP) and ACHL1 (8 DIP) Frequency Range Operating Temperature (TOPR) Storage Temperature (TSTO) Frequency Stability (DF/ Fo) Supply Voltage (Vdd) Input Current (I dd) Duty Cycle or Symmetry Rise and Fall Times (TR / TF) Output Load Output Voltage Start-up Time Tristate Function (Option “-A” ONLY) (Fo) 1.00MHz - 85.0MHz 0°C to +70°C (See Options) -55°C to +125°C ±100ppm max. (See Options) 2.5Vdc ±10% 15m A max. 40 / 60% max. (typical 45 / 55%) (See Options) 10ns max. PARAMETERS SPECIFICATIONS ACOL1 (14 DIP) 5TTL or 15pF 0.9 *Vdd min. (VOH) 0.1 *Vdd max. (VOL) (TOSC) 10ms max. > _ 1.8V (VIH) “1” or Open: Oscillation “0”:Output disabled in high impedance (Hi Z) < 0.4V (VIL) 100ns max. (for Option “- A” ONLY) Output Disable / Enable Time ACH L1 ( 8 DIP) * Pin 1 has internal pull-up resistor which allows Pin 1 to be left floating (enable high) opt. A. Test circuit, waveforms, see appendix B. Recommended handling, see appendix F. Environmental and mechanical specifications, see appendix C. Group 1. Marking, see appendix G. Value added, see appendix D. Application notes, see appendix A. ORDERING OPTIONS O or H Dimensions: Inches (mm) ACX L1 - Frequency - Temperature - Overall Frequency Stability - Duty Cycle - Tristate - Value Added - Packaging -R -K -H -C for ± 25ppm max for ± 30ppm max for ± 35ppm max for ± 50ppm max -S for 45 / 55% @ 1/ 2Vdd - A for Tristate E / D -G Gull Wing -G2 Gull Wing (ACHL1) -QXX (Trimmed Leads) ** Standard Operating Temperature Only. ABRACON IS ISO 9001 / QS 9000 CERTIFIED NOTE: Left blank if standard • All specifications and markings subject to change without notice XX.XXXXX MHz or kHz -D for -10°C to + 60°C -E for -20°C to + 70°C -F for -30°C to + 70°C -N for -30°C to + 85°C -L for -40°C to + 85°C -T for Tape and reel -TY for Tray packing ACOL ACHL PIN # PIN # FUNCTION 1 7 8 14 ABRACON 1 4 5 8 NC or E/D GND / Case Output Vdd 29 Journey • Aliso Viejo, CA 92656 • USA (949) 448-7070 • F AX : (949) 448-8484 E-MAIL: abinfo@ abracon.com • INTERNET ADDRESS: www.abracon.com ® C O R P O R AT I O N 53 .


ACOL1 ACHL1 COROLLA


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)