DatasheetsPDF.com

Analog Multiplexers/Switches. MAX4524L Datasheet

DatasheetsPDF.com

Analog Multiplexers/Switches. MAX4524L Datasheet






MAX4524L Multiplexers/Switches. Datasheet pdf. Equivalent




MAX4524L Multiplexers/Switches. Datasheet pdf. Equivalent





Part

MAX4524L

Description

(MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches

Manufacture

Maxim Integrated Products

Datasheet
Download MAX4524L Datasheet


Maxim Integrated Products MAX4524L

MAX4524L; www.DataSheet4U.com 19-2940; Rev 1; 6/07 Low-Voltage, Single-Supply Analog Mul tiplexers/Switches General Description The MAX4524L/MAX4525L are low-voltage, single-supply CMOS analog switches conf igured as a 4-channel multiplexer/demul tiplexer (MAX4524L) and a doublepole/do uble-throw (DPDT) switch (MAX4525L). Th e MAX4524L/MAX4525L have an inhibit inp ut to simultaneous.


Maxim Integrated Products MAX4524L

ly open all switches. These devices oper ate from a single supply of +2V to +12V . They are optimized for operation with a +12V supply. The on-resistance is 10 0Ω with a +12V supply. Each switch ca n handle Rail-to-Rail analog signals. O ff-leakage current measures only 2nA at +25°C. All digital inputs have 0.8V t o 2.0V logic thresholds to ensure TTL/C MOSlogic compatibilit.


Maxim Integrated Products MAX4524L

y when using a +12V supply. o +3V Logic- Compatible Inputs (VIH = 2.0V, VIL = 0. 8V) o +2V to +12V Supply Operation o 10 0Ω On-Resistance with +12V Supply o G uaranteed 10Ω On-Resistance Match at +12V o Guaranteed 2nA Maximum Off-Leaka ge at +12V o TTL/CMOS-Logic Compatible o Tiny 10-Pin TDFN (3mm × 3mm) and 10- Pin µMAX Packages Features MAX4524L/ MAX4525L Applications A.



Part

MAX4524L

Description

(MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches

Manufacture

Maxim Integrated Products

Datasheet
Download MAX4524L Datasheet




 MAX4524L
MAX4524L/MAX4525L
EVALUATION KIT AVAILABLE
Low-Voltage, Single-Supply Analog
Multiplexers/Switches
General Description
The MAX4524L/MAX4525L are low-voltage, single-supply
CMOS analog switches configured as a 4-channel multi-
plexer/demultiplexer (MAX4524L) and a double-pole/dou-
ble-throw (DPDT) switch (MAX4525L). The MAX4524L/
MAX4525L have an inhibit input to simultaneously open
all switches.
These devices operate from a single supply of +2V to
+12V. They are optimized for operation with a +12V sup-
ply. The on-resistance is 100Ω with a +12V supply. Each
switch can handle Rail-to-Rail analog signals. Off-leakage
current measures only 2nA at +25°C. All digital inputs
have 0.8V to 2.0V logic thresholds to ensure TTL/CMOS-
logic compatibility when using a +12V supply.
Applications
● Audio and Video Signal Routing
● Data-Acquisition Systems
Communications Circuits
DSL Modems
Features
● +3V Logic-Compatible Inputs
(VIH = 2.0V, VIL = 0.8V)
● +2V to +12V Supply Operation
100Ω On-Resistance with +12V Supply
Guaranteed 10Ω On-Resistance Match at +12V
● Guaranteed 2nA Maximum Off-Leakage at +12V
● TTL/CMOS-Logic Compatible
● Tiny 10-Pin TDFN (3mm x 3mm) and 10-Pin µMAX
Packages
Ordering Information
PART
TEMP RANGE
MAX4524LEUB -40°C to +85°C
MAX4524LETB -40°C to +85°C
MAX4525LEUB -40°C to +85°C
MAX4525LETB -40°C to +85°C
*EP = Exposed pad.
PIN-
PACKAGE
10 μMAX
10 TDFN-EP*
(3mm x 3mm)
10 μMAX
10 TDFN-EP*
(3mm x 3mm)
TOP
MARK
AAL
AAM
Pin Configurations/Functional Diagrams/Truth Tables
TOP VIEW
MAX4524L
MAX4525L
NO2 1
NO3 2
NO1 3
INH 4
GND 5
LOGIC
10 V+
NOA 1
9 COM COMA 2
8 NO0 NCA 3
7 ADDA INH 4
6 ADDB GND 5
LOGIC
10 V+
9 COMB
8 NOB
7 NCB
6 ADD
µMAX/ TDFN
µMAX / TDFN
MAX4524L
INH ADDB ADDA
ON
SWITCH
1 X X NONE
00
0 COM-NO0
00
1 COM-NO1
01
0 COM-NO2
01
1 COM-NO3
MAX4525L
INH ADDB
ON
SWITCH
1X
NONE
0
0
COMA-NCA,
COMB-NCB
0
1
COMA-NOA,
COMB-NOB
19-2940; Rev 2; 4/14





 MAX4524L
MAX4524L/MAX4525L
Low-Voltage, Single-Supply Analog
Multiplexers/Switches
Absolute Maximum Ratings
(All Voltages Referenced to GND, Unless Otherwise Noted.)
V+...........................................................................-0.3V to +13V
Voltage at Any Pin (Note 1)..........................-0.3V to (V+ + 0.3V)
Continuous Current into Any Terminal...............................±20mA
Peak Current NO_, NC_ or COM_
(pulsed at 1ms, 10% duty cycle)...................................±40mA
ESD per Method 3015.7...................................................>2000V
Continuous Power Dissipation (TA = +70°C)
10-Pin µMAX (derate 5.6mW/°C above +70°C)...........444mW
10-Pin TDFN (derate 24.4mW/°C above +70°C).......1951mW
Operating Temperature Range
MAX452_E_ _................................................. -40°C to +85°C
Storage Temperature Range............................. -65°C to +150°C
Junction Temperature.......................................................+150°C
Lead Temperature (soldering, 10s).................................. +300°C
Note 1: Voltages exceeding V+ or GND on any signal terminal are clamped by internal diodes. Limit forward-diode current to maxi-
mum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Electrical Characteristics–Single +12V Supply
(V+ = 12V ±5%, GND = 0V, VIH = 2.0V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
(Notes 2, 3)
PARAMETER
ANALOG SWITCH
Analog Signal Range
COM-NO/NC
On-Resistance
COM-NO/NC
On-Resistance
Match Between Channels
COM-NO/NC
On- Resistance Flatness
NO/NC Off-Leakage
SYMBOL
CONDITIONS
VCOM, VNO_
RON
V+ = 11.4V, ICOM = 1mA,
VCOM = 10V
∆RON
V+ = 11.4V, ICOM = 1mA,
VCOM = 10V (Note 4)
RFLAT
INO(OFF)
INC(OFF)
V+ = 11.4V, ICOM = 1mA,
VCOM = 1.5V, 6.0V, 10V
(Note 5)
V+ = 12.6V, VNO = 1.0V, 10V,
VCOM = 10V, 1.0V (Note 6)
COM Off-Leakage
ICOM(OFF)
V+ = 12.6V,
VNO = 1V, 10V;
VCOM = 10V,
1V (Note 6)
MAX4524L
MAX4525L
COM ON-Leakage
DIGITAL I/O (INH, ADD_)
Logic-Input Threshold High
Logic-Input Threshold Low
Input Current High
Input Current Low
ICOM(ON)
V+ = 12.6V,
VCOM = 10V,
1V (Note 6)
MAX4524L
MAX4525L
VIH
VIL
IIH VADD_ = VINH = 2.0V
IIL VADD_ = VINH = 0.8V
TEMP
MIN
-40°C to +85°C
+25°C
-40°C to +85°C
+25°C
-40°C to +85°C
0
+25°C
+25°C
-40°C to +85°C
+25°C
-40°C to +85°C
+25°C
-40°C to +85°C
+25°C
-40°C to +85°C
+25°C
-40°C to +85°C
-2
-10
-2
-50
-2
-25
-2
-50
-2
-25
-40°C to +85°C
-40°C to +85°C
+25°C
+25°C
0.18
-1
-1
TYP
45
2
5
1.5
1.5
MAX UNITS
V+ V
80
Ω
100
10
Ω
15
12 Ω
+2
nA
+10
+2
+50
nA
+2
+25
+2
+50
nA
+2
+25
2.0 V
V
+1 µA
+1 µA
www.maximintegrated.com
Maxim Integrated 2





 MAX4524L
MAX4524L/MAX4525L
Low-Voltage, Single-Supply Analog
Multiplexers/Switches
Electrical Characteristics (continued)
(V+ = 12V ±5%, GND = 0V, VIH = 2.0V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
(Notes 2, 3)
PARAMETER
SYMBOL
SWITCH DYNAMIC CHARACTERISTICS
CONDITIONS
Inhibit Turn-On Time
tON
VNO_= 10V, RL = 300Ω,
CL = 35pF, Figure 1
TEMP
MIN TYP MAX UNITS
+25°C
-40°C to +85°C
90 150
ns
200
Inhibit Turn-Off Time
Address Transition Time
tOFF
tTRANS
VNO_= 10V, RL = 300Ω,
CL = 35pF, Figure 1
VNO_= 10V, RL = 300Ω,
CL = 35pF, Figure 2
+25°C
-40°C to +85°C
+25°C
-40°C to +85°C
40 120
ns
180
90 150
ns
200
Break-Before-Make Time
Charge Injection
tBBM
Q
VNO = 10V, RL = 300Ω,
CL = 35pF, Figure 3
C = 1nF, Figure 4 (Note 7)
+25°C
+25°C
20 ns
0.8 pC
NO/NC Off-Capacitance
COM Off-Capacitance
CNO(OFF)
CCOM(OFF)
VNO_ = 0V, ƒ = 1MHz, Figure 5
VNO_ = 0V, ƒ =
1MHz, Figure 5
MAX4524L
MAX4525L
+25°C
+25°C
+25°C
4 pF
14
pF
6
COM On-Capacitance
CCOM(ON)
VNO_ = 0V, ƒ =
1MHz, Figure 5
MAX4524L
MAX4525L
+25°C
+25°C
20
pF
12
Off-Isolation
Channel-to-Channel
Crosstalk (MAX4525L)
VISO
VCT
RL = 50Ω, ƒ = 1MHz, Figure 6
RL = 50Ω, ƒ = 1MHz, Figure 6
+25°C
+25°C
92 dB
96 dB
On-Channel -3dB
Bandwidth
BW Figure 6
+25°C
200 MHz
Total Harmonic Distortion
THD
RL = 600Ω, VCOM = 2.5VP-P,
20Hz to 20kHz BW
+25°C
0.02 %
POWER SUPPLY
Power-Supply Range
V+
-40°C to +85°C 2
12.6
V
Power-Supply Current
I+
V+ = 12.6V,
VADD_ = VINH = V+ or 0V
+25°C
-40°C to +85°C
-1
-10
+1
μA
+10
Note 2: The TDFN package is production tested at TA = +25°C. Limits over temperature are guaranteed by design.
Note 3: The algebraic convention used in this data sheet is where the most negative value is a minimum column.
Note 4: ∆RON = RON(MAX) - RON(MIN).
Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal ranges.
Note 6: Leakage parameters are 100% tested at maximum-rated hot operating temperature and guaranteed by design at TA = +25°C
Note 7: Guaranteed by design, not production tested.
www.maximintegrated.com
Maxim Integrated 3



Recommended third-party MAX4524L Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)