DatasheetsPDF.com

SIL10E Dataheets PDF



Part Number SIL10E
Manufacturers Artesyn Technologies
Logo Artesyn Technologies
Description DC/DC CONVERTERS
Datasheet SIL10E DatasheetSIL10E Datasheet (PDF)

www.DataSheet4U.com SIL10E Series DC/DC CONVERTERS • • • • • • • E Class Non-isolated Single output 1 NEW Product 10A Current rating Input voltage range: 3.0V - 5.5V Output voltage range: 0.8V - 3.63V Ultra high efficiency: 95% @ 5Vin and 3.3Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Industry standard f.

  SIL10E   SIL10E



Document
www.DataSheet4U.com SIL10E Series DC/DC CONVERTERS • • • • • • • E Class Non-isolated Single output 1 NEW Product 10A Current rating Input voltage range: 3.0V - 5.5V Output voltage range: 0.8V - 3.63V Ultra high efficiency: 95% @ 5Vin and 3.3Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Industry standard footprint and pin out The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or a 3.3V source. The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry leading 10A which allows maximum design flexibility and a pathway for future upgrades. The SIL10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10E offers compact size and efficiencies of up to 95%. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability Fixed output versions 5Vin with wide trim 3.3Vin with wide trim ±10% 3.6V to 0.8V 2.75V to 0.8V ±2.7% ±1.0% ±1.0% 0A None 50mV pk-pk 25mV rms max. ±0.01%/ºC 50mV max. deviation 50µs recovery to within ±1.0% 10% Vo compensation EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 Setpoint accuracy Line regulation Load regulation Minimum load Overshoot/undershoot Ripple and noise 0 to 20MHz BW Temperature co-efficient Transient response GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Approvals and standards Material flammability Dimensions (Vertical version) Pin length Weight MTBF Telcordia SR-332 (LxWxH) Vertical Fixed See table Non-isolated 300kHz typ. EN60950 UL/cUL60950 UL94V-0 50.8 x 7.8 x 12.7mm 2.0 x 0.31 x 0.5 inches 0.135 ±0.02 in (3.43 ±0.5mm) 5g (0.18oz) 7,042,000 Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input current ripple Remote ON/OFF Start-up time International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E174104 UL60950 file No. E174104 3.0 to 5.5VDC No load 70mA 8A max. @ Io max. and Vout = 3.3V 65mA rms (See Note 1) 20ms ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient, (See Note 2) Non-operating -40ºC to +100ºC -40ºC to +125ºC PROTECTION Short-circuit protection Thermal protection Continuous Automatic recovery TÜV TÜV Product Service (EN60950) Certificate No. B02 12 38572 035 CB report and certificate to IEC60950 File Name: sil10e.pdf Rev: 27 Feb 2003 www.DataSheet4U.com SIL10E Series DC/DC CONVERTERS E Class Non-isolated2 OUTPUT POWER (MAX.) 8.8W 11W 13.2W 16.5W 19.8W 22W 27.5W 36.3W 36.3W INPUT VOLTAGE 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 3.0V - 5.5V 4.5V - 5.5V 4.5V - 5.5V OUTPUT VOLTAGE 0.8V 1.0V 1.2V 1.5V 1.8V 2.0V 2.5V 3.3V 3.3V Single output NEW Product For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT (MIN.) 0A 0A 0A 0A 0A 0A 0A 0A 0A OUTPUT CURRENT (MAX.) 10A 10A 10A 10A 10A 10A 10A 10A 10A EFFICIENCY (TYP.) 83% 86% 88% 90% 92% 93% 94% 95% 95% REGULATION LINE ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1% LOAD ±1.5% ±1.5% ±1% ±1% ±1% ±1% ±1% ±1% ±1% MODEL NUMBER SIL10E-05S0V8-V SIL10E-05S1V0-V SIL10E-05S1V2-V(3) SIL10E-05S1V5-V SIL10E-05S1V8-V SIL10E-05S2V0-V SIL10E-05S2V5-V(3) SIL10E-05S3V3-V SIL10E-05W3V3-V Part Number System with Options SIL10E-05S3V3-V Mounting Option V = Vertical Mount H = Horizontal Mount Output Voltage 2.5V, 3.3V etc Number of Outputs S = Single W = Wide Product Family SIL = Single In Line Rated Output Current 10 = 10Amps Performance E = Enhanced Performace Input Voltage 05 = 3.0V - 5.5V 12 = 10V - 14V Output Voltage Adjustment of the SIL10-05Wxxx Series Output Voltage Adjustment of the SIL10E-05W3V3 Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL10E-05W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8V to 3.6V. When the SIL10E-05W3V3 converter leaves the factory the output has been adjusted to the default voltage of 3.3V • When Vin ≥ 4.5V, then Vout can be adjusted from 0.8V to 3.6V • When Vin < 4.5V, then Vout can be adjusted from 0.8V to 2.75V Notes 1 Referenced to ground for shutdown. If pin 6 is high unit will shutdown. If pin 6 is open unit will operate as normal. Converter is guaranteed OFF when control pin is greater than 1.2V. Full de-rating curves available in both the Long Form Data Sheet and Applica.


SIL104 SIL10E SIL15


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)