GP1A05E2J00F

www.DataSheet4U.com GP1A05EJ000F Series GP1A05EJ000F Series Gap : 5mm, Slit : 0.5mm *OPIC Output Transmissive Photointerrupter with Connector ■ Description GP1A05EJ000F Series are standard, OPIC output, transmissive photointerrupters with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remote-mount or off-board designs. ■ Agency approvals/Compliance 1. Compliant with RoHS directive ■ Applications 1. General purpose detection of object presence or motion. 2. Example: PPC, FAX, Printer ■ Features 1. Transmissive with OPIC output 2. Highlights : Includes additional screw fixing holes Positioning Pin to prevent misalignment 3. Key Parameters : Gap Width : 5mm Slit Width (detector side) : 0.5mm Package : 34×18 ×11mm (without connector and positloning pin) Connector : GP1A05EJ000F ; Tyco Electronics AMP K.K. (PN : 171825-3) GP1A05E2J00F ; J.S.T. Mfg Co., Ltd. (PN : B3P-SHF-IAA (LF)) Output Type : Low when the object is present. 4. Lead free and RoHS directive compliant * "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signalprocessing Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP...