www.DataSheet4U.com
GP1S58VJ000F
GP1S58VJ000F
Gap : 5mm, Slit : 0.5mm Phototransistor Output, Case package Transmissi...
www.DataSheet4U.com
GP1S58VJ000F
GP1S58VJ000F
Gap : 5mm, Slit : 0.5mm Photo
transistor Output, Case package Transmissive Photointerrupter
■ Description
GP1S58VJ000F is a standard, photo
transistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design. This device uses positioning pins to insure accurate placement and avoid miss-orientation of the emitter and detector.
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or motion. 2. Example : Printer, FAX, Optical storage unit
■ Features
1. Transmissive with photo
transistor output 2. Highlights : Vertical Slit for alternate motion detection Positioning Pin to prevent misalignment 3. Key Parameters : Gap Width : 5mm Slit Width (detector side): 0.5mm Package : 13.7×10×5.2mm 4. Lead free and RoHS directive compliant
Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
Sheet No.: D3-A02702EN Date Sep. 1. 2006 © SHARP Corporation
GP1S58VJ000F
■ Internal...