GPS LOW NOISE AMPLIFIER GaAs MMIC
www.DataSheet4U.com
NJG1130KA1
GPS LOW NOISE AMPLIFIER GaAs MMIC
! GENERAL DESCRIPTION NJG1130KA1 is a low noise ampli...
Description
www.DataSheet4U.com
NJG1130KA1
GPS LOW NOISE AMPLIFIER GaAs MMIC
! GENERAL DESCRIPTION NJG1130KA1 is a low noise amplifier GaAs MMIC designed for GPS application at the 1.575GHz. The LNA offers excellent low noise figure, high linearity and low current consumption. Two stage amplifier and ESD protection circuit are integrated in the IC to achieve very high gain and high ESD tolerance. An ultra-small and ultra-thin package of FLP6-A1 is adopted. ! FEATURES " Low voltage operation " Low current consumption " High gain " Low noise figure " 1dB gain compression output power " High output IP3 " Ultra-small & ultra-thin package ! PIN CONFIGURATION ! PACKAGE OUTLINE
NJG1130KA1
+2.85V typ. 5.0mA typ. 29.0dB typ. @ f=1.575GHz 0.65dB typ. @ f=1.575GHz +11.0dBm typ. @ f=1.575GHz +14dBm typ. @ f=1.575+1.5751GHz, Pin=-35dBm FLP6-A1 (Package size: 1.6x1.6x0.6mm)
(Top View) Pin Connection
4
AMP
3
1. 2. 3. 4. 5. 6. RF OUT GND VDD RF IN GND GND
5
2
6
AMP
1
Package Orientation Mark
Note: Specifications and description listed in this datasheet are subject to change without notice.
Ver.2007-06-13
-1-
www.DataSheet4U.com
NJG1130KA1
! ABSOLUTE MAXIMUM RATINGS Ta=+25°C, Zs=Zl=50ohm PARAMETERS Drain Voltage Input power Power dissipation Operating temperature Storage temperature SYMBOL VDD Pin PD Topr Tstg VDD=2.85V on PCB board, at Tjmax=150°C CONDITIONS RATINGS 5.0 +15 170 -40~+85 -55~+150 UNITS V dBm mW °C °C
! ELECTRICAL CHARACTERISTICS GENERAL CONDITIONS: VDD=2.85V, freq=1.575...
Similar Datasheet