Switch. ISL54500 Datasheet

ISL54500 Datasheet PDF


Part

ISL54500

Description

Single SPDT Analog Switch

Manufacture

Intersil Corporation

Page 11 Pages
Datasheet
Download ISL54500 Datasheet


ISL54500 Datasheet
www.DataSheet4U.com
®
Data Sheet
+1.8V to +5.5V, 5Ω, Single SPDT Analog
Switch
The Intersil ISL54500 device is a low ON-resistance, low
voltage, bidirectional, single pole/double throw (SPDT)
analog switch designed to operate from a single +1.8V to
+5.5V supply. Targeted applications include battery powered
equipment that benefit from low ON-resistance and fast
switching speeds (tON = 22ns, tOFF = 15ns). The digital logic
input is 1.8V CMOS compatible when using a single +3V
supply.
Cell phones, for example, often face ASIC functionality
limitations. The number of analog input or GPIO pins may be
limited and digital geometries are not well suited to analog
switch performance. This part may be used to “mux-in”
additional functionality while reducing ASIC design risk. The
ISL54500 is offered in the 6 Ld 1.2mmx1.0mmx0.4mm pitch
µTDFN package, alleviating board space limitations.
The ISL54500 is a committed SPDT that consist of one
normally open (NO) and one normally closed (NC) switch.
This configuration can also be used as a 2-to-1 multiplexer.
TABLE 1. FEATURES AT A GLANCE
ISL54500
Number of Switches
1
SW
1.8V rON
1.8V tON/tOFF
3V rON
3V tON/tOFF
5V rON
5V tON/tOFF
Package
SPDT or 2-1 MUX
12Ω
70ns/52ns
6.0Ω
30ns/20ns
5.0Ω
22ns/15ns
6 Ld μTDFN
August 29, 2007
ISL54500
FN6549.1
Features
• ON-resistance (rON)
- VCC = +5.0V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0Ω
- VCC = +3.0V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.0Ω
- VCC = +1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Ω
• rON matching between channels . . . . . . . . . . . . . . . . . 46mΩ
• rON flatness (+4.5V Supply) . . . . . . . . . . . . . . . . . . . . . . 1.1Ω
• Single supply operation . . . . . . . . . . . . . . . . . +1.8V to +5.5V
• Fast switching action (+4.5V Supply)
- tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22ns
- tOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15ns
• Guaranteed break-before-make
• ESD HBM rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6kV
• 1.8V, CMOS logic compatible (+3V supply)
• Available in 6 Ld µTDFN package
• Pb-free available (RoHS compliant)
Applications
• Battery powered, handheld, and portable equipment
- Cellular/mobile phones
- Pagers
- Laptops, notebooks, palmtops
• Portable Test and Measurement
• Medical Equipment
• Audio and video switching
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.

ISL54500 Datasheet
ISL54500
Ordering Information
PART NUMBER
(Note)
PART MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PKG. DWG. #
ISL54500IRUZ-T*
0
-40 to +85
6 Ld μTDFN (Tape and Reel) L6.1.2x1.0A
*Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and
NiPdAu plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Pinout (Note 1)
ISL54500 (μTDFN)
TOP VIEW
NO 1
GND 2
NC 3
6 IN
5 V+
4 COM
NOTE:
1. Switches Shown for Logic “0” Input.
Pin Descriptions
NAME PIN
FUNCTION
V+ 5 System Power Supply Input (+1.8V to +5.5V)
GND
2 Ground Connection
IN 6 Digital Control Input
COM
4 Analog Switch Common Pin
NO 1 Analog Switch Normally Open Pin
NC 3 Analog Switch Normally Closed Pin
Truth Table
LOGIC
PIN NC
PIN NO
0 ON OFF
1
OFF
ON
NOTE: Logic “0” 0.5V. Logic “1” 1.4V with a 3V supply.
2 FN6549.1
August 29, 2007


Features Datasheet pdf www.DataSheet4U.com ® ISL54500 Data S heet August 29, 2007 FN6549.1 +1.8V to +5.5V, 5Ω, Single SPDT Analog Switch The Intersil ISL54500 device is a low O N-resistance, low voltage, bidirectiona l, single pole/double throw (SPDT) anal og switch designed to operate from a si ngle +1.8V to +5.5V supply. Targeted ap plications include battery powered equi pment that benefit from low ON-resistan ce and fast switching speeds (tON = 22n s, tOFF = 15ns). The digital logic inpu t is 1.8V CMOS compatible when using a single +3V supply. Cell phones, for exa mple, often face ASIC functionality lim itations. The number of analog input or GPIO pins may be limited and digital g eometries are not well suited to analog switch performance. This part may be u sed to “mux-in” additional function ality while reducing ASIC design risk. The ISL54500 is offered in the 6 Ld 1.2 mmx1.0mmx0.4mm pitch µTDFN package, al leviating board space limitations. The ISL54500 is a committed SPDT that consist of one normally open (NO) an.
Keywords ISL54500, datasheet, pdf, Intersil Corporation, Single, SPDT, Analog, Switch, SL54500, L54500, 54500, ISL5450, ISL545, ISL54, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)