HD66704

www.DataSheet4U.com HD66704 (Graphics LCD Controller/Driver with Two 16-Character Lines and 160 Segments) ADE-207-331(Z) Rev 2.0 June 2001 Description The HD66704 LCD controller and driver LSI is used to display alphanumeric characters, katakana, hiragana, a variety of symbols, and seven-segment numerals. It can be connected to a high-performance microcomputer via a high-speed clock-synchronized serial connection or on a four-bit bus. The HD66704 is capable of displaying two 16-character lines and 160 segments or one 16-character line and 240 segments in its character mode. The HD66704 has 432 built-in fonts for character display and supports double-height display. In its segment mode, it can drive up to 320 segments (at a duty cycle of 1/4). Segment-by-segment control of a blinking state, as well as the on/off state, is available. The HD66704 applies various techniques for reducing the power consumption of an LCD system. These include low-voltage operation at 1.8 V or less, a booster to generate a maximum of triple the LCD-drive voltage from the supplied voltage, and voltage-followers to decrease the flow of direct current into the LCDdrive bleeder-resistors. The HD66704 has a slim-chip configuration and interface-signal alignment that make it appropriate for chipon-glass (COG) mounting. It is suitable for any product in which an LCD display may be used, such as facsimiles, telephones, pagers, audio equipment, video tape recorders, and electronic wallets. Features Two ...