HLC-1520A

www.DataSheet4U.com Tadiran HLC (Hybrid Layer Capacitor) Model HLC-1520A 1. Scope This data sheet describes the mechanical design and performance of Tadiran HLC (Hybrid Layer Capacitor) model HLC-1520A, optimized for extreme temperatures, used in a Pulses Plus battery. 2. Characteristics 2.1. Physical Length: Diameter: Weight: Discharge Discharge capacity (at RT): When charged to 3.67V: When charged to 3.90V: Discharge end voltage: 140 A*sec 210 A*sec 2.5V (discharge below 2.5V at RT and discharge below 2 V at –40oC may increase the HLC internal impedance) Continuous: 500 mA Pulse: 2 A 2.2.2. Charge (constant current) Max. charge voltage: Max. charging current: 3.95 V 25 mA 19.7 ± 0.3 mm. 15.1 mm. max. 7.7 ± 0.2 gr. 2.1.1. 2.1.2. 2.1.3. 2.2. 2.2.1. Electrical Maximum discharge current: Rev. D, April 05. Page 1 of 6 THE INFORMATION PROVIDED HERE IS NECESSARILY OF A GENERAL NATURE. SINCE SPECIFIC PERFORMANCE DEPENDS ON ACTUAL OPERATING AND STORAGE CONDITIONS, OUR ENGINEERS WILL PROVIDE PARTICULAR APPLICATION INSTRUCTIONS UPON REQUEST. DATA SUBJECT TO REVISION WITHOUT NOTICE. ANY REPRESENTATION IN THIS BROCHURE CONCERNING PERFORMANCE ARE FOR INFORMATION PURPOSES ONLY AND NOT WARRANTIES, EITHER EXPRESSED OR IMPLIED, OF FUTURE PERFORMANCE. TADIRAN’S STANDARD LIMITED WARRANTY, STATED IN ITS SALES CONTRACT OR ORDER CONFIRMATION FORM IS THE ONLY WARRANTY OFFERED BY TADIRAN. 2.2.3. Shelf life (Reversible Capacity): The table below describes the shelf life at different storage te...