www.DataSheet4U.com
on. ange. ificati h l spec ct to c a finaare subje t o n is its is m h li T e: tric Notice parame So...
www.DataSheet4U.com
on. ange. ificati h l spec ct to c a finaare subje t o n is its is m h li T e: tric Notice parame Som
MITSUBISHI SEMICONDUCTOR <
TRANSISTOR ARRAY>
P
MIN RELI
ARY
M63830P/FP
4-UNIT 1.5A DARLINGTON
TRANSISTOR-ARRAY WITH CLAMP DIODE
PIN CONFIGURATION
DESCRIPTION The M63830P/FP 4-channel sinkdriver, consists of 4
PNP and 8
NPN transistors connected to from four high current gain driver pairs.
VCC OUTPUT1 O1
1 2 3 4
16 15 14 13
COM COMMON O4 OUTPUT4 IN4 INPUT4 GND
FEATURES G High breakdown voltage (BV CEO ≥ 50V) G High-current driving (IC(max) = 1.5A) G 3V micro computer series compatible input G With clamping diodes G With input diode G Wide operating temperature range (Ta = –40 to +85° C)
INPUT1 IN1 GND
5
12 11 10 9
INPUT2 IN2 OUTPUT2 O2 VCC
6 7 8
IN3 INPUT3 O3 OUTPUT3 COM COMMON
16P4(P) Package type 16P2N-A(FP) APPLICATION Output for 3 voltage microcomputer series and interface with high voltage system. Relay and small printer driver, LED, or incandescent display digit driver. CIRCUIT DIAGRAM FUNCTION The M63830FP/P is
transistor-array of high active level four units type which can do direct drive of 3 voltage microcomputer series. A resistor of 3.5kΩ is connected between the input and the base of
PNP transistors. A clamp diode for inductive load transient suppression is connected for the output pin (collector) and COM pin. The input diode is intended to prevent the flow of current from the input to the Vcc. Without this diode, the current f...