PA38

www.DataSheet4U.com Cascadable Amplifier 200 to 2000 MHz Features WIDE BANDWIDTH: 200-2400 MHz (TYP.) HIGH OUTPUT LEVEL: +23.0 dBm (TYP.) LOW NOISE FIGURE: 4.0 dB (TYP.) HIGH THIRD ORDER I.P.: +34 dBm (TYP.) PA38/SMPA38 V3 Product Image Description The PA38 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This two stage GaAs FET feedback amplifier design displays impressive performance characteristics over a broadband frequency range. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number PA38 SMPA38 CPA38 Package TO-8 Surface Mount SMA Connectorized Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC Typical Parameter Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max) DC Current @ 15 Volts (max) mA Absolute Maximum Ratings Parameter Storage Temperature Case Temperature DC Voltage Continuous Input Power Short Term Input power (1 minute max.) Guaranteed 0º to 50ºC 0.2-2.0 8.5 ±0.7 Units 25ºC GHz dB dB dB dB dBm dBm dBm dBm 0.2-2.4 10.0 ±0.3 17 4.0 23.0 +34 +55 +60 1.7:1 / 1.5:1 150 1.9:1 / 1.9:1 158 2.0:1 / 2.0:1 160 4.7 21.5 5.2 21.0 Absolute Maximum -62ºC to +125ºC 85ºC +16 V +17 dBm 100 mW 1W 85ºC -54º to +85ºC* 0.2-2.0 8.0 ±1.0 Peak Power (3 µsec ma...