(MCP4011 - MCP4014) Low-Cost 64-Step Volatile Digital POT
www.DataSheet4U.com
MCP4011/2/3/4
Low-Cost 64-Step Volatile Digital POT
Features
• Volatile Digital Potentiometer in SO...
Description
www.DataSheet4U.com
MCP4011/2/3/4
Low-Cost 64-Step Volatile Digital POT
Features
Volatile Digital Potentiometer in SOT-23, SOIC, MSOP and DFN packages 64 Taps: 63 Resistors with Taps to terminal A and terminal B Simple Up/Down (U/D) Protocol Power-on Recall of Default Wiper Setting - Custom POR wiper settings available (contact factory) Resistance Values: 2.1 kΩ, 5 kΩ, 10 kΩ or 50 kΩ Low Tempco: - Absolute (Rheostat): 50 ppm (0°C to 70°C typ.) - Ratiometric (Potentiometer): 10 ppm (typ.) Low Wiper Resistance: 75Ω (typ.) High-Voltage Tolerant Digital Inputs: Up to 12.5V Low-Power Operation: 1 µA Max Static Current Wide Operating Voltage Range: - 1.8V to 5.5V - Device Operation - 2.7V to 5.5V - Resistor Characteristics Specified Extended Temperature Range: -40°C to +125°C Wide Bandwidth (-3 dB) Operation: - 4 MHz (typ.) for 2.1 kΩ device
Package Types
MCP4011 SOIC, MSOP, DFN Potentiometer
VDD 1 VSS 2 A 3 W 4 A W B 8 U/D 7 NC 6 B 5 CS VDD 1 VSS 2 U/D 3 B
MCP4012 SOT-23-6 Rheostat
A W 6 A 5 W 4 CS
MCP4013 SOT-23-6 Potentiometer
VDD 1 VSS 2 U/D 3 B A W 6 A 5 W 4 CS VDD 1 VSS 2 U/D 3
MCP4014 SOT-23-5 Rheostat
W B A 5 W
4 CS
Block Diagram
A VDD Power-Up and Brown-Out Control Wiper Register (Resistor Array)
VSS
Description
The MCP4011/2/3/4 devices are volatile, 6-bit Digital Potentiometers that can be configured as either a potentiometer or rheostat. The wiper setting is controlled through a simple Up/Down (U/D) serial interface.
CS U/D
2-Wire Inte...
Similar Datasheet