LED CHASER LIGHT
w w w . D a t a S h e e t 4 U . c o m
KNIGHTLIGHT
KLS2 16 LED CHASER LIGHT
General Description
The KLS2 Chaser Light is...
Description
w w w . D a t a S h e e t 4 U . c o m
KNIGHTLIGHT
KLS2 16 LED CHASER LIGHT
General Description
The KLS2 Chaser Light is available in Red, Green, Amber, Blue and White using 5mm T1 ¾ LED’s. A length of wire is attached to the light for ease of installation. The lights can be used as it stands or other modules can be daisy chained to make a longer light effect.
May 2002
Page 1 of 9
6-12V -10C to +70c <100mA
Operating Ratings
Voltage Input Temerature Supply current
Configuration Options
KLS2c-xx-yy
c Colour r = g = b = a = w = Red Green Blue Amber White
Features
? Fading trail effect ? Refresh rates in excess of 8000Hz ? Can be configured for external inputs
? Automotive Security Light for the dash. ? Decorative Light for a PC
Applications
xx
Noise Suppression Option IMU = Supression Fitted PC = No Supression Fitted How the LED’s are mounted = Monted on edge t = Monted on Top b = Monted on Bottom w = 16 inch wires.
yy
Wiring Diagram
The KLS2 Chaser Light comes with 80cm or more of both Yellow and black wire, soldered to the light at one end and the other end is bare tinned wire.
0V +V
C
Copyright 2002 Knightlight
www.knightlight.co.uk
www.DataSheet4U.com
KNIGHTLIGHT
KLS2-PC 16 LED CHASER LIGHT
Mechanical Diagram
May 2002
Page 2 to 9
This model of the scanner light is ideal for a home computer or anywhere where there is a 12V or 9V DC power available. LED’s mounted on the edge of the board.
C
Copyright 2002 Knightlight
www.knightlight.co.uk
www.Dat...
Similar Datasheet