SD05Hxx

www.DataSheet4U.com C&K SD Series Low Profile DIP Switches Typical Applications Address switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications Features/Benefits Low profile design saves space Thru-hole and surface mount models Tape and reel packaging available Sealed with top tape RoHS compliant - options available I DIP How To Order Complete part numbers for SD Series are shown on pages I–9 through I–11. All switches supplied in “OFF” position in rigid dispensing tubes or tape and reel packaging. Specifications SWITCH FUNCTION: SPST - 2, 3, 4, 5, 6, 7, 8, 9, 10 & 12 positions CONTACT RATING: Carry: 100 mA @ 50 V DC max. Switch: 0.1 mA @ 5 V DC min to 100 mA @ 25 V DC max. MECHANICAL AND ELECTRICAL LIFE: 2,000 make-and-break cycles at full load, each circuit. CONTACT RESISTANCE: Below 50 milliohms typ. initial @ 2-4 V DC, 100mA. INSULATION RESISTANCE: 109 ohms min. DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between adjacent terminals. STORAGE TEMPERATURE: -40°C to 85°C. OPERATING TEMPERATURE: -20°C to 85°C. OPERATING FORCE: 100-700g inital. PACKAGING: Thru-hole switches supplied in rigid dispensing tubes in full-tube quantities only: this may effect order quantity. Surface mount switches available in tape and reel packaging by added ‘R’ to end of part number; 1,000 pieces per reel. Switch position 1 denotes pin number 1. All switch actuators in ‘OFF’ position, standard. Materials ...