WR06X473

www.DataSheet4U.com CHIP RESISTORS WR08 WR06 WR04 2.0 0.1 1.6 0.1 1.0 0.05 1.25 0.1 0.8 0.1 0.5 0.05 0.4 0.2 0.3 0.1 0.2 0.1 0.4 0.2 0.3 0.2 0.25 0.1 0.5 0.15 0.45 0.15 0.35 0.05 Series No Power rating at 70 1/8W 1/10W 1/16W TCR (ppm/ ) 100 200 100 200 200 200 Max RCWV (Note1) 100V 100V 50V 50V 50V 50V Max Overload Voltage 200V 200V 100V 100V 100V 100V Resistance Tolerance( %) 1 5 1 5 1 2,5 Resistance Range(Note2) 10 1 10 1 6.8 6.8 ~ 1M ~ 10M ~ 1M ~ 10M ~2.2M ~ 2.2M Standard Res. Values E-96 E-24 E-96 E-24 E-96 E-24 Working Temperature Range( ) WR08 WR06 WR04 -55 ~ 125 www.DataSheet4U.com PILKOR ELECTRONICS CO., LTD. Test Item DC Resistance Specification Chip Resistor With the specified tolerance Jumper 50m lower Test Method JIS C 5202 5.1 DC Resistance values measured at the test voltages specified below : Resistance nominal Test voltage 100 0.3V 1k 1V 10k 3V 100k 10V 1M 25V 10M 50V JIS C 5202 5.2 / IEC 115-1 4.8.4.2 Natural resistance change per temperature degree centigrade TCR(ppm/ ) = R2 - R1 X10 6 R1 (t2 - t1) R1 : Resistance value at referance temperature R2 : Resistance value at test temperature t1 : Room temperature, t2 : Test temperature JIS C 5202 5.5 / IEC 115-1 4.13 Permanent resistance change after a 5 second application of a voltage 2.5 times RCWV or the maximum overload voltage specified in the above list, whichever is less. JIS C 5202 6.4 / IEC 115-1 4.18 With 260 5 for 10 1 second. JIS C 5202 6.5 / IEC 115-1 4.17 After immersing flux,...