VS750

www.DataSheet4U.com www.DataSheet4U.com Preliminary Data Sheet VS-750 Dual Frequency VCSO Features 5 x 7.5 x 2.5 mm Package Output Frequencies from 500 MHz to 850 MHz 3.3 V Operation Low Jitter < 0.25 ps-rms across 50 kHz to 80 MHz LV-PECL Configuration with Fast Transition Times Complementary Outputs Frequency Select Output Disable Patent Pending Technology Fully Compatible for Lead Free Assembly Pb Applications PLL circuits for Clock Smoothing and Frequency Translation Description 1-2-4 Gigabit Fibre Channel 10 Gigabit Fibre Channel 10GbE LAN / WAN OC-192 SONET / SDH Vcc COutput Output Standard INCITS 352-2002 INCITS 364-2003 IEEE 802.3ae ITU-T G.709 GR-253-CORE Issue3 Description SAW 1 SAW 2 Vc OD FS Gnd The VS-750 is a SAW based voltage controlled oscillator that operates at the fundamental frequencies of the internal SAW filters. These SAW filters are high-Q quartz devices that enable the circuit to achieve low phase jitter performance over a wide operating temperature range. The dual oscillator is housed in a hermetically sealed leadless surface mount package offered on tape and reel. It has a frequency select function that enables either “Frequency 1” or “Frequency 2.” It also has an output disable to facilitate on-board testing. Tel: 1-88-VECTRON-1 Website: www.vectron.com Rev: 03Mar05 Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Page 1 of 7 www.DataSheet4U.com VS-750 Voltage Controlled SAW Oscillator Electric...