Chip Inductors. 1008LS-xxxXKB Datasheet

1008LS-xxxXKB Inductors. Datasheet pdf. Equivalent


Part 1008LS-xxxXKB
Description Chip Inductors
Feature Document 103-1 www.DataSheet4U.com ChipInductors – 1008LSSeries(2520) These ferrite core surface mo.
Manufacture Coilcraft
Datasheet
Download 1008LS-xxxXKB Datasheet


Document 103-1 www.DataSheet4U.com ChipInductors – 1008LSSe 1008LS-xxxXKB Datasheet
Recommendation Recommendation Datasheet 1008LS-xxxXKB Datasheet




1008LS-xxxXKB
www.DataSheet4U.com
Document 103-1
ChipInductors – 1008LSSeries(2520)
These ferrite core surface mount inductors have lower
DCR and higher current ratings than our 1008CS Series.
They’re available with inductance values from 1.2 to 10 µH.
Coilcraft Designer’s Kit C136 contains samples of all
5% inductance tolerance parts. To order, contact Coil-
craft or visit http://order.coilcraft.com to order on-line.
Part Number1
1008LS-122X _ B _
1008LS-152X _B_
1008LS-182X _B_
1008LS-222X _B_
1008LS-272X _ B _
1008LS-332X _B_
1008LS-392X _B_
1008LS-472X _B_
1008LS-562X _B_
1008LS-682X _B_
1008LS-822X _B_
1008LS-103X _B_
Inductance2
(µH)
1.2 @ 7.9 MHz
1.5 @ 7.9 MHz
1.8 @ 7.9 MHz
2.2 @ 7.9 MHz
2.7 @ 7.9 MHz
3.3 @ 7.9 MHz
3.9 @ 7.9 MHz
4.7 @ 7.9 MHz
5.6 @ 7.9 MHz
6.8 @ 7.9 MHz
8.2 @ 7.9 MHz
10.0 @ 7.9 MHz
Percent
Tolerance3
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
10,5
Q Min4
48 @ 50 MHz
41 @ 50 MHz
39 @ 50 MHz
34 @ 50 MHz
34 @ 50 MHz
32 @ 50 MHz
32 @ 7.9 MHz
31 @ 7.9 MHz
31 @ 7.9 MHz
31 @ 7.9 MHz
23 @ 7.9 MHz
31 @ 7.9 MHz
SRF Min5 DCR Max6
(MHz) (Ohms)
210 .68
190 .76
170 .84
150 1.10
135 1.28
120 1.46
105 1.56
90 1.68
80 1.82
70 2.00
65 2.65
60 2.95
IDC Max7
(mA)
650
630
600
520
490
450
420
400
380
360
330
300
1. When ordering, please specify tolerance and packaging codes:
Inductance tolerance code:
Table above shows stock tolerances in bold.
J= ±5%, K= ±10%
1008LS-103X _B_
Packaging code:
C = 7machine-ready reel EIA RS-481 clear plastic
tape. 2000 per reel.
B = Less than full reel Not machine-ready. The car-
rier tape may not be a single continuous length. To
have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13machine-ready reel EIA RS-481 clear plastic
tape. Factory order only, not stocked. 7500 per reel.
2. Inductance measured using Coilcraft SMD-A fixture in Agilent/HP4286A
impedance analyzer with Coilcraft-provided correlation pieces. For
recommended test procedures, contact Coilcraft.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using Agilent/HP4291A with Agilent/HP16193 test fixture.
5. SRF measured using Agilent/HP8753D network analyzer with Coilcraft
SMD-D fixture.
6. DCR measured on Cambridge Technology Micro-ohmmeter.
7. For 15° C rise.
8. Operating temperature range 40° C to +85° C.
9. Electrical specifications at 25°C.
10. For environmental data, see “Product Specifications” page (Doc. 121).
11. For part marking data, see “Color Coding” page (Doc. 174).
Specifications subject to change without notice. Document 103-1 Revised 4/19/01



1008LS-xxxXKB
www.DataSheet4U.com
1008LS Series (2520)
TYPICAL Q vs FREQUENCY
50
40 1.8 µH
2.2 µH
3.3 µH
30
6.8 µH
20
10
0
1 10
B
overall
F
C
H
I
A
G
J
Land
Pattern
E
terminal
FI
D
Terminal wraparound:
approx. .015/0.38 both ends
ABCDEFGH I J
Max. Max. Max. Ref.
.115 .110 .080 .020 .080 .020 .060 .100 .040 .050
2,92 2,79 2,03 0,51 2,03 0,51 1,52 2,54 1,02 1,27
Parts/reel: 72,000; 137,500 Tape width: 8 mm
For packaging data, see “Tape and Reel Specifications” (Document 173).
Frequency (MHz)
100
L vs FREQUENCY
Document 103-2
1000
Specifications subject to change without notice. Document 103-2 Revised 4/9/01







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)