DatasheetsPDF.com

U0805FxxxxxT Dataheets PDF



Part Number U0805FxxxxxT
Manufacturers Multicomp
Logo Multicomp
Description Multilayer Ceramic Capacitors
Datasheet U0805FxxxxxT DatasheetU0805FxxxxxT Datasheet (PDF)

www.DataSheet4U.com Nickel Barrier Multilayer Ceramic Capacitors Features: • Multilayer ceramic chip capacitor. • Nickel barrier termination. • High performance and reliability. • 0603, 0805, and 1206 case size. Rated Voltage Code A B T U Rated Voltage 100 16 25 50 Part Dimension Dimensions Length (L) 1.6 ±0.1 2.0 ±0.2 3.2 ±0.2 1.25 ±0.1 1.60 ±0.2 Width (W) Maximum Thickness (T) 0.8 ±0.1 1.40 1.52 Minimum MB 0.20 0.25 Minimum G 0.40 0.70 1.40 Voltage (V) 6.3 ~ 50 6.3 ~ 500 6.3 ~ 1000 Type 060.

  U0805FxxxxxT   U0805FxxxxxT


Document
www.DataSheet4U.com Nickel Barrier Multilayer Ceramic Capacitors Features: • Multilayer ceramic chip capacitor. • Nickel barrier termination. • High performance and reliability. • 0603, 0805, and 1206 case size. Rated Voltage Code A B T U Rated Voltage 100 16 25 50 Part Dimension Dimensions Length (L) 1.6 ±0.1 2.0 ±0.2 3.2 ±0.2 1.25 ±0.1 1.60 ±0.2 Width (W) Maximum Thickness (T) 0.8 ±0.1 1.40 1.52 Minimum MB 0.20 0.25 Minimum G 0.40 0.70 1.40 Voltage (V) 6.3 ~ 50 6.3 ~ 500 6.3 ~ 1000 Type 0603 0805 1206 Page 1 27/04/06 V1.0 www.DataSheet4U.com Nickel Barrier Multilayer Ceramic Capacitors Temperature Characteristics Code Code C R F Temperature Coefficient NPO (Class I) X7R (Class II) Y5V (Class II) Operation Temperature (°C) -55°C ~ +125 30°C ~ +85 Capacitance Change 0 ±30ppm/°C ±15% +22% ~ -82% Capacitance Code Code 010 1R5 100 101 102 103 222 472 Capacitance (pF) 1* 1.5 10* 100* 1000* 10000* 2200* 4700* Tolerance Code Code J K Z PS: · · Tolerance (%) ±5 ±10 +80/-20 * -- Two significant digits followed by number of zeros. Temperature coefficient (T.C.) vs. Proper tolerance applied: NPO: For all tolerance X7R+X5R: K+M Tolerance Y5V+Z5U: M+Z Tolerance Termination Code Code Termination Type N Nickel Packaging Code Code Packaging Type B Bulk T Tape and Reel Standard Test Conditions Tests shall, unless otherwise specified, be carried out at 15 to 35°C and RH 45 to 75%.If any doubt and argument has been encounter in judgement, the final test shall be done at 25 ±2°C, RH45 to 55% and 860 ~ 1060mbar. (Based on JIS standard). Disposition If question to the measuring result in judgement, take the capacitor under a specified temperature for 30 minutes at least before measurement. Page 2 27/04/06 V1.0 www.DataSheet4U.com Nickel Barrier Multilayer Ceramic Capacitors Structure Ag/Pd Series Number 1 2 3 4 5 End Terminal Specifications Ceramic Dielectric Internal Electrode Material Ceramic Ag-Pd Ag layer Ni layer Sn-Pb layer or Sn layer Minimum Termination Plating Thickness (µ m) 40 1.5 - 3.5 3-8 BME Series Number 1 2 3 4 5 Specifications Ceramic Dielectric Internal Electrode End Termination Material Ceramic Ni Cu layer Ni layer Sn-Pb layer or Sn layer Minimum Termination Plating Thickness (µ m) 40 1.5 - 3.5 3-8 Storing Condition And Term Recommends the storing of products within 6 months at temperature 15 ~ 35°C and humidity 70%RH maximum. If the product stored over 6 months, please reconfirm its solderability before use. Page 3 27/04/06 V1.0 www.DataSheet4U.com Nickel Barrier Multilayer Ceramic Capacitors Performance Item External Appearance Performance No defects which may affect performance Test or Inspection Method Visual inspection and dimension measurement DC Tested voltage shall be applied for 1 ~ 5 second. Charge/discharge current shall not exceed 50mA (PS : Ra - Rated Voltage) Code Voltage Proof Withstand test voltage without insulation breakdown or other damage ≤200V 250V 500V/630V ≥1KV 1.5Ra Temperature Coefficient NPO X7R/X5R 2.5Ra 2.0Ra 1.5Ra 1.25Ra Y5V Insulation Resistance NPO: 100,000MΩ minimum or R x C ≥1000Ω x F (Which ever is smaller) X7R, X5R, Y5V, Z5U: 10,000MΩ minimum or R x C ≥ 1000Ω x F (Which ever is smaller) Within the specified tolerance NPO: ≥30pF: Q ≥ 1000 <30pF: Q ≥ 400 + 20C PS:C: Nominal Capacitance (pF) X7R, X5R, Y5V, and Z5U : (Maximum Value) T.C. X7R/ X5R Z5U Y5V ≥ 50V 2.5% 4.0% 5.0% 25V 3.0% 7.5% 16V 3.5% ≤10V 5.0% - Rated Voltage <1KV ≥1KV DC Tested Voltage 1.0 Ra 1KV Apply DC tested voltage for 60 ±5 minute. (PS : Ra - Rated Voltage) Capacitance (Cap.) Dissipation Factor (D.F) Measuring Frequency: Z5U,Y5V, X7R, X5R : 1KHz ±50Hz NPO: >1000pF:1KHz ±50Hz. ≤1000pF:1MHz 100KHz. Measuring Voltage: Z5U:0.5Vrms. NPO: X7R, X5R, Y5V:1.0 ±0.2Vrms. 9.0% 12.5% Page 4 27/04/06 V1.0 www.DataSheet4U.com Nickel Barrier Multilayer Ceramic Capacitors Item Performance Temperatures Coefficient TC Operating Temperature Capacitance Change (DC) 0 ±30 (ppm/°C) ±15% ±15% +22% ~ -82% +22% ~ -56% Test or Inspection Method The temperature coefficient is determined using the capacitance measured in step 3 as a reference. Test the specimen from step 1through step 5, the capacitance shall be within the specified tolerance for the capacitance coefficient and capacitance change as left table. Code 1 2 3 4 5 Temperature Coefficient Base Temperature (25°C) ±2°C Minimum Operation Temperature ±2°C Base Temperature (25°C) ±2°C Minimum Operation Temperature ±2°C Base Temperature (25°C) ±2°C NPO -55 ~ +125°C Temperature Characteristic of Capacitance X7R -55 ~ +125°C X5R Z5U -55 ~ +85°C -55 ~ +125°C Y5V -55 ~ +125°C Solderabiliy New solder to over 95% of termination Leaching External Appearance No mechanical Damage NPO Capacitance X7R/X5 Change R (∆ C/C) Z5U Y5V Soldering to heat ±2.5% or ±0.25 pF maximum (Whichever is larger) ±7.5% ±20% ±20% Completely soak both terminal electrodes in solder at specified temperature for 3 ±0.5 second a. For Tin-Lead Sn/Pb) Termination product: 235 .


4101-004 U0805FxxxxxT U0805RxxxxxT


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)