Silicon SUrge Absorber
www.DataSheet4U.com
Silicon Surge Absorber ZP/CP Series RSSA
The silicon surge absorber is available in five series tha...
Description
www.DataSheet4U.com
Silicon Surge Absorber ZP/CP Series RSSA
The silicon surge absorber is available in five series that support the countermeasure against a wide range of surges from low to high, including electrostatic discharges and lightning surges. The device may also be used as a constant voltage device where high voltage or high power is required.
Features Fast response to rapid surges (10-12 sec). Almost no performance degradation against repetitive surges. Very low internal resistance during operation. Very small leak current. Mesa chip design provides high invulnerability to impulse surges. Applications
DC/CD Converter
a) Protection Against Switching Surge
b) Protection of DC/CD Converter
Device
Device
c) Protection of Interface RS485A from Lighting Surge (Surge Absorber-Composite Surge Protector)
e) Protection of Data Line (Arrayed Surge Absorbers)
www.DataSheet4U.com
Silicon Surge Absorber ZP/CP Series
Electrical Characteristics Breakdown Voltage (VBR)
Voltage at which avalanche current may begin to flow, normally the voltage between the surge absorber’s leads when 1mA of current is applied.
Standoff Voltage (V(R)SO)
A maximum voltage that can be applied to the surge absorber continuously.
Voltage vs. Current Characteristics of Model CP (Two-way type)
Reverse Leakage Current (I(R)SO)
A maximum current flowing through the surge absorber when the standoff voltage is applied to the surge absorber. A maximum surge current that can ...
Similar Datasheet