IHLP-2525BD-01

www.vishay.com IHLP-2525BD-01 Vishay Dale IHLP® Commercial Inductors, High Saturation Series DESIGN SUPPORT TOOLS click logo to get started Models Available Design Tools Available STANDARD ELECTRICAL SPECIFICATIONS L0 INDUCTANCE DCR ± 20 % AT 100 kHz, TYP. 0.25 V, 0 A 25 °C (μH) (mΩ) 0.1 1.5 0.22 2.9 0.33 3.7 0.47 6.0 0.68 8.7 0.82 10.6 1.0 13.1 1.5 18.5 2.2 28.0 3.3 36.5 4.7 45.2 6.8 72.5 8.2 84.2 10 115.6 DCR MAX. 25 °C (mΩ) 1.7 3.2 4.1 6.5 9.4 11.8 14.2 21.2 34.0 51.6 63.0 95.0 106 129 HEAT RATING CURRENT DC TYP. (A) (1) 30 21 18 13.5 11 10 9.0 7.5 6.5 5.0 4.5 3.5 3.0 2.5 SATURATION CURRENT DC TYP. (A) (2) 50 34 22 21 18 17 16 15 14 13 10 9 8 7 Notes All test data is referenced to 25 °C ambient Operating temperature range -55 °C to +125 °C The part temperature (ambient + temp. rise) should not exceed 125 °C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. Rated operating voltage (across inductor) = 75 V (1) DC current (A) that will cause an approximate ΔT of 40 °C (2) DC current (A) that will cause L0 to drop approximately 20 % FEATURES Lowest height (2.4 mm) in this package footprint Shielded construction Frequency range up to 5.0 MHz Lowest DCR/μH, in this package size Handles high transient current spikes without saturation Ultra low bu...