6EP13363BA00 Supplies Datasheet

6EP13363BA00 Datasheet, PDF, Equivalent


Part Number

6EP13363BA00

Description

SITOP Power Supplies

Manufacture

Siemens

Total Page 2 Pages
Datasheet
Download 6EP13363BA00 Datasheet


6EP13363BA00
www.DataSheet4U.com
SITOP Power Supplies
Switched Mode Regulated Technology
Power supplies, single-phase
Description
SITOP switched mode power
supplies offer high efficiency,
safe electrical isolation (SELV)
and low weight.
Different versions are available
depending on the output cur-
rent and application required.
The 2.5 A, 5 A and 10 A power
supplies are the first members
of a generation of 24 VDC
power supplies, called SITOP
smart.
They come with a 1/3 smaller
width compared to the former
generation, ATEX and UL class
1, div 2 agency approvals for
use in hazardous locations and
a power boost function to serve
high inrush loads.
Power supplies are suitable for
worldwide single-phase net-
works. Every power supply pro-
vides LED status display,
adjustable output voltage and
can be snapped on DIN rail.
Power supplies meet
• radio interference suppres-
sion class B,
• ambient temperature range
from 0 °C to +60 °C.
Selection and ordering data
Design
Input
voltage,
rated value
Ue Rated
24 VDC power supplies
* 0.375 A
48 – 220 VDC
(30 – 264 VDC/
30 – 187 VAC)
* 0.5 A
120 – 230 VAC
(93 – 264 VAC)
Output
voltage,
rated value
Ua Rated
Current,
rated
value
Ia Rated
Dimensions
(W x H x D)
mm
24 VDC ±2% 0.375 A 22.5 x 80 x 91
24 VDC ±2% 0.5 A 22.5 x 80 x 91
N
Limitation of input current harmonics according to EN 61 000-3-2.
2.5 A
120 – 230 VAC
(85 – 132 VAC/
170 – 264 VAC)
24 VDC ±3% 2.5 A 33 x 125 x 125
N
N
Limitation of input current harmonics according to EN 61 000-3-2
5A
120 – 230 VAC
24 VDC ±3% 5 A
50 x 125 x 125
(85 – 132 VAC/
170 – 264 VAC)
5A
120 – 230 VAC
24 VDC ±3% 5 A
50 x 125 x 125
(85 – 132 VAC/
170 – 264 VAC)
Limitation of input current harmonics according to EN 61 000-3-2
10 A
120 – 230 VAC
(85 – 132 VAC/
170 – 264 VAC)
24 VDC ±3% 10 A
70 x 125 x 135
10 A
120 – 230 VAC
(85 – 132 VAC/
170 – 264 VAC)
24 VDC ±3% 10 A
70 x 125 x 135
Deg. of protection IP 65, adapted to ET 200X; Wall mounting radio interference
suppression class A, ambient temperature -20°C to 55°C
10 A
120 – 230 VAC
(93 – 132 VAC/
187 – 264 VAC)
24 VDC ±3% 10 A
140 x 270 x 126
Order No.
6EP17312BA00
6EP13312BA10
6EP13322BA10
6EP13332BA01
6EP13332AA01
6EP13342BA01
6EP13342AA01
6EP13342CA00
Weight
approx.
kg
0.2
0.2
0.4
0.5
0.5
0.8
0.8
1.7
Limitation of input current harmonics according to EN 61 000-3-2
20 A
120 – 230 VAC
(90 – 132 VAC/
187 – 264 VAC)
24 VDC ±3% 20 A
280 x 125 x 92
3 VDC to 52 VDC power supply
Limitation of input current harmonics to according EN 61 000-3-2,
adjustable output voltage 3 V – 52 V, output max. 10 A or 120 W
max.
10 A
or
120 W
120 – 230 VAC
(85 – 132 VAC/
170 – 264 VAC)
3 – 52 VDC
± 1%
10 A
75 x 125 x 125
6EP13362BA00
6EP13532BA00
2.0
0.9
* without adjustable output voltage.
Further information is provided in catalog KT 10.1 or: www.siemens.com/sitop
Siemens Energy & Automation, Inc.
Industrial Controls Catalog
15/21

6EP13363BA00
SITOPwww.DataSheet4U.com Power Supplies
Switched Mode Regulated Technology
Power supplies, single phase, three phase;
Power security components
Description
Modular power supplies
Basis of the modular concept is
a complete line of 24 VDC power
supplies from 5A up to 40A.
• compact design
• adjustable output voltage up to
28.8 VDC
• 3 LED operating indications
• Selectable reaction to short
circuit: automatic restart or
storing shutdown
• Possible to use in parallel
connection (load sharing)
• DIN rail mounting
SITOP Modular comes in:
• 5A, 10A, 20A and 40A devices
can be used for single-phase
(L1 and N) and for 3-phase
applications by using 2 hot
wires only within the provided
input voltage range capability
The power supplies fulfill:
• Radio interference
suppression, class B
• Restriction of the input current
harmonic waves in acc. w. EN
61 000-3-2 (except
6EP1337-3BA00)
Power supplies and add-on
modules meet:
• Ambient temperature range
from 0°C + 60°C
Power Security Components
The signaling module can be
snapped onto the left side of the
basic device. The module offers
floating signal contacts (“output
voltage o.k. and “ready for
operation o.k.”) and a signal input
for remote ON/OFF of the basic
device.
The buffer module bypasses
power interruptions in the msec
range. 100 msec at 40 A, 800
msec at 5 A, up to max. of 3 sec
at low load current, DIN rail
mounting is possible at any loca-
tion in the switching cabinet.
The redundancy module
guarantees stable 24VDC power
by decoupling two power
supplies in parallel operation. The
module monitors both power
supplies and makes sure that the
stand by power supply
immediately takes over when the
output voltage of the operating
power supply drops below the
(adjustable) threshold voltage.
For applications above 20 amps
one redundancy module per
power supply is required.
Selection and ordering data
Design
Input voltage,
Output voltage, Current, Dimensions
rated value
rated value
rated
value (W x H x D)
Ue Rated
Ua Rated
Ia Rated mm
24 VDC power supplies, single-phase (L1 and N or L1 and L2)
5 A 120/230–500 VAC
24 VDC ±3% 5 A 70 x 125 x 125
(85–132 VAC/176–550 VAC)
Order No.
6EP13333BA00
Weight
approx.
kg
1.2
10 A
120/230–500 VAC
24 VDC ±3%
(85–132 VAC/176–550 VAC)
10 A 90 x 125 x 125 6EP13343BA00
1.4
20 A
120/230 VAC
24 VDC ±3%
(85–132 VAC/176–264 VAC)
20 A 160 x 125 x 125 6EP13363BA00
40 A
120/230 VAC
24 VDC ±3%
(85–132 VAC/176–264 VAC)
40 A 240 x 125 x 125 6EP13373BA00
24 VDC power supplies, three-phase
20 A
3 x 400–500 VAC
(3 x 340–550 VAC)
24 VDC ±3%
20 A 160x 125 x 125 6EP14363BA00
40 A
3 x 400–500 VAC
(3 x 340–550 VAC)
24 VDC ±3%
40 A 240 x 125 x 125 6EP14373BA00
Power security components
Signaling
module
25 x 125 x 125 6EP19613BA10
Buffer
module
24 VDC
(24–28.8 VDC)
24 VDC ±3%
40 A 70 x 125 x 125 6EP19613BA00
2.2
2.9
2.0
3.2
0.2
1.0
Redundancy 24 VDC
module
(24–28.8 VDC)
0.5 VDC ±3%
20 A 70 x 125 x 125 6EP19613BA20
1.0
Further information is provided in catalog KT 10.1 or: www.siemens.com/sitop
15/22
Siemens Energy & Automation, Inc.
Industrial Controls Catalog


Features www.DataSheet4U.com Switched Mode Regul ated Technology Power supplies, single- phase SITOP Power Supplies Descriptio n SITOP switched mode power supplies of fer high efficiency, safe electrical is olation (SELV) and low weight. Differen t versions are available depending on t he output current and application requi red. The 2.5 A, 5 A and 10 A power supp lies are the first members of a generat ion of 24 VDC power supplies, called SI TOP smart. They come with a 1/3 smaller width compared to the former generatio n, ATEX and UL class 1, div 2 agency ap provals for use in hazardous locations and a power boost function to serve hig h inrush loads. Power supplies are suit able for worldwide single-phase network s. Every power supply provides LED stat us display, adjustable output voltage a nd can be snapped on DIN rail. Power su pplies meet • radio interference supp ression class B, • ambient temperatur e range from 0 °C to +60 °C. Selecti on and ordering data Design Input voltage, rated value Ue Rated 48 – .
Keywords 6EP13363BA00, datasheet, pdf, Siemens, SITOP, Power, Supplies, EP13363BA00, P13363BA00, 13363BA00, 6EP13363BA0, 6EP13363BA, 6EP13363B, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)