1351100 Resistors Datasheet

1351100 Datasheet, PDF, Equivalent


Part Number

1351100

Description

Precesion Power Wirewoumd Resistors

Manufacture

RCD Components

Total Page 1 Pages
Datasheet
Download 1351100 Datasheet


1351100
www.DataSheet4U.com
PRECISION POWER WIREWOUND RESISTORS
RESISTORSŠ CAPACITORSŠ COILSŠ DELAY LINES
SILICONE COATED 1/2 WATT TO 50 WATT
RCD 160F
100 SERIES
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
10K5%
Series 100 resistors offer exceptional performance at an economical
ˆ World’s widest range of axial lead WW resistors! 0.005to 2M,
tolerances to ±0.005%, 1/2W to 50W, numerous design options
ˆ Low cost! Available on exclusive SWIFTTM delivery program
cost. Superior stability results from welded construction and windings of
premium grade resistance wire on thermally conductive ceramic cores.
Hi-temp coating provides excellent environmental protection and solvent
resistance. Tin (or SnPb) coated copper or copperweld leads offer
OPTIONS
ˆ Option X: Low Inductance
ˆ Option P: Increased Pulse Capability
ˆ Option F: Flameproof Coating
ˆ Option ER: 100-Hour Burn-In
ˆ Option B: Increased Power
ˆ Radial leads (opt.R), low thermal emf (opt.E), matched sets, special
marking, cut &formed leads, hi-rel screening, non-standard values,
high voltage, etc. Customized components are RCD’s speciality!
excellent solderabilty and extended shelf life.
PULSE CAPABILITY: Excellent pulse capability results from wirewound
construction. The pulse/overload capability can often be economically
enhanced by a factor of 50% or more via special Option P processing.
Pulse capability is highly dependent on size and resistance value, consult
factory (available up to 500 joules).
INDUCTANCE: small sizes have inductance of 1- 50uH typ. Larger sizes
and higher values typically have greater levels. For non-inductive design,
specify Opt. X. The max. series inductance for Opt.X resistors at 0.5MHz
DERATING (derate W/V/A ratings when ambient temp. exceeds 25°C):
Char. U is the max. power for ±0.5% typ. load life stability & 275°C
hotspot, Char. V is max. power for ±3% stability & 350°C hotspot
100 CHAR. V
is listed in table (per MIL-R-39007). Specialty
constructions are available for even lower
inductance levels (Opt.75 inductance =
50% of Opt.X, Opt.76 = 33% of Opt.X).
RCD Type
102X-140X
145X-160X
165X-178X
50
0.2µH
0.3µH
0.65µH
> 50
0.37µH
0.6µH
1.2µH
75
50
25
0
-65 25
CHAR. U
Tol <0.1%
50 75 100 125 150 175 200 225 250 275 300 325
AMBIENT TEMPERATURE ( °C )
350
1.375” Min9
Type 102 is 1.1”
A3
D
C2
RCD
Type
MIL
Type5
Std. Wattage
Ratings
Char.U Char.V
Opt.B Wattage
Ratings
Char.U Char.V
Resistance
Range 6, 7
Maximum
Voltage
Rating 1,6
DIMENSIONS [Numbers in brackets are mm]
A 3 C2 D8 ± .003 [.08]
± .062 [1.58] ± .032 [.81] Std.
Optional
102
-
0.5 0.8
0.8 1.0
.01- 2K
30V .16 ±.03 [4.±.8] .07±.02[1.8±.5] .020
-
110 RW81 (110B) 0.8 1.0
1.5 2.0
.01- 8K
40V .24 ±.03 [6.±.8] .085 [2.16] .020 .024 (opt. 22)
115
-
1.0 1.2
1.5 2.0
.01- 12K
45V .312 [7.92] .085 [2.16] .020 .024 (opt. 22)
120
-
1.0 1.2
- - .01- 15K
50V .344 [8.74] .093 [2.36] .020 .024 (opt. 22)
Stock 125 RW70 (125B RW80) 1.5 1.8
2.0 2.5
.01- 20K
55V .406 [10.3] .093 [2.36] .020 .024 (opt. 22)
130
-
1.6 2.0
--
.01- 22K
65V .530 [13.5] .093 [2.36] .020 .024 (opt. 22)
133
-
2.0 3.0
3.0 4.0 .005- 20K
80V .355 [9.00] .156 [3.96] .032 .024 (opt. 22)
Stock 135
RW69
3.0 4.0
4.0 5.0 .005- 40K
140V .500 [12.7] .188 [4.78] .032 .024(22), .040(18)
140
RW79
3.0 4.0
4.0 5.0 .005- 50K
140V .550 [14.2] .188 [4.78] .032 .040 (opt. 18)
145
-
3.5 4.5
4.5 6.5 .005- 60K
180V .770 [19.6] .188 [4.78] .032 .040 (opt. 18)
150
-
3.5 4.5
5.0 7.0 .005- 60K
150V .500 [12.7] .225 [5.72] .040 .032 (opt. 20)
155
-
4.0 5.0
6.0 8.0 .005- 100K
210V .625 [15.9] .225 [5.72] .040 .032 (opt. 20)
156
-
5.0 6.0
- - .005- 150K
300V .800 [20.3] .250 [6.35] .040 .032 (opt. 20)
Stock 160
RW74
5.0 7.0
7.0 10
.005- 200K
400V .875 [22.2] .312 [7.92] .040 .032 (opt. 20)
165
RW67
6.0 7.5
- - .005- 220K
450V 1.000 [25.4] .312 [7.92] .040 .032 (opt. 20)
170
-
7.0 9.0
10 12 .005- 300K
550V 1.200 [30.9] .312 [7.92] .040 .032 (opt. 20)
171
-
7.0 8.5
- - .005- 250K
700V 1.660 [42.2] .208 [5.28] .032 .040 (opt. 18)
172
-
8.5 10
- - .005- 400K
900V 2.100 [53.3] .225 [5.72] .032 .040 (opt. 18)
173
-
9.0 11
12 14 .005- 400K
650V 1.550 [39.4] .300 [7.62] .040 .032 (opt. 20)
Stock 1754
RW68, 78
10 13
15 18 .005- 500K
900V 1.7204 [43.7] .3504 [8.89] .040 .032 (opt. 20)
176
-
10 12
- - .005- 500K
800V 1.875 [47.6] .300 [7.62] .040 .032 (opt. 20)
178
-
13 15
- - .01- 750K
1150V 2.410 [61.2] .350 [8.89] .040 .032 (opt. 20)
180
RW56
14 16
16 20
.01- 800K
1000V 2.100 [53.3] .500 [12.7] .040
-
185
-
20 25
--
.015- 1M
1350V 2.800 [71.1] .500 [12.7] .040
-
186 - 25 30
.010- 1M
1400V 4.060 [103] .350 [8.89] .040 .032 (opt. 20)
190
-
40 50
--
.025- 2M
1500V 5.000 [127] .500 [12.7] .040
-
1 Working voltage= (PR)1/2, not to exceed max rating (multiply by 0.7 for Opt.X). 2 Allow .032” additional for Opt X or values <13 Coating overflow onto each lead 2xD 4 Until existing inventory is depleted, type 175 may
be .397” [10mm] dia.x 1.81 [46] long with 1.3”[33] lead length 5 Military p/n’s are given for reference only and do not imply qualification or exact interchangeability. 6 Increased range avail. 7 Resis. value measured at 3/8”
±1/16” from each end of body 8 Heavier lead gauge option is recommended on low values to enable lower leadwire resis., increased current, and improved TC 9 Lead length applies to bulk packaged units (taped parts may
be shorter, refer to taping spec.) 10 Dependent on value, options, etc
TYPICAL PERFORMANCE10
Load Life (Char.U)
±0.5% (±1% on sizes >10W)
P/N DESIGNATION:
RCD Type
135 - 102 - J B W
Thermal Shock
Moisture Resistance
±0.2%
±0.2%
Options: X, R, V, P, F, ER, E, B, 76, 75, 22, 20, 18
(leave blank if standard)
Shock and Vibration
Overload, 5 Sec
Dielectric Strength
Max. Current (not to exceed
wattage or voltage rating)
TC (ppm/°C) 10
1- 9.9
0.1- .99
.05-.099
.01-.049
±0.1%
5x rated W 102-156, 10x W 160-190
500V (for 1KV specify opt.33)
Resistors with .020" dia leads = 11A,
.024" = 15A, .032" = 22A, .040"= 30A
20ppm (5 & 10ppm avail.)
50ppm (10, 20, 30ppm avail.)
90ppm (20, 30, 50 ppm avail.)
300ppm (50, 100, 200ppm avail.)
600ppm (100, 200, 300ppm avail.)
Resis. Code 1% & tighter tols: 3 signif. digits & multiplier,
e.g. R100= 0.1, 1R00= 1,1000= 100, 1001= 1K.
2%-10%: 2digits &multiplier (R10= .1Ω, 1R0=1,100=10, 102=1K).
Use extra digits as needed: R005, R0075, R012, etc.
Tolerance: K=10%, J=5%, H=3%, G=2%, F=1%, D=0.5%,
C=0.25%, B=0.1%, A=0.05%, Q=0.02%, T=0.01%, V=.005%
Packaging: B= Bulk, T= T&R (avail. on type 102 to 176)
Optional TC: 5= 5ppm, 10= 10ppm, 20= 20ppm, 30= 30ppm,
50= 50ppm, 101= 100ppm, 201=200ppm (leave blank if std)
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
FA039G Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
43


Features www.DataSheet4U.com 100 SERIES PRECISI ON POWER WIREWOUND RESISTORS SILICONE C OATED 1/2 WATT TO 50 WATT RoHS Term.W i s RoHS compliant & 260°C compatible R ESISTORSŠ CAPACITORSŠ COILSŠ DELAY L INES RCD 160F 10KΩ 5% ˆ World’s widest range of axial lead WW resistors ! 0.005Ω to 2MΩ, tolerances to ±0. 005%, 1/2W to 50W, numerous design opti ons ˆ Low cost! Available on exclusive SWIFTTM delivery program OPTIONS ˆ Op tion X: Low Inductance ˆ Option P: Inc reased Pulse Capability ˆ Option F: Fl ameproof Coating ˆ Option ER: 100-Hour Burn-In ˆ Option B: Increased Power Radial leads (opt.R), low thermal emf (opt.E), matched sets, special marking , cut &formed leads, hi-rel screening, non-standard values, high voltage, etc. Customized components are RCD’s spec iality! DERATING (derate W/V/A ratings when ambient temp. exceeds 25°C): Char . U is the max. power for ±0.5% typ. l oad life stability & 275°C hotspot, Ch ar. V is max. power for ±3% stability & 350°C hotspot % RATED POWER Series 100 resistors.
Keywords 1351100, datasheet, pdf, RCD Components, Precesion, Power, Wirewoumd, Resistors, 351100, 51100, 1100, 135110, 13511, 1351, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)