135-xxxx Resistors Datasheet

135-xxxx Datasheet, PDF, Equivalent


Part Number

135-xxxx

Description

Precesion Power Wirewoumd Resistors

Manufacture

RCD Components

Total Page 1 Pages
Datasheet
Download 135-xxxx Datasheet


135-xxxx
www.DataSheet4U.com
PRECISION POWER WIREWOUND RESISTORS
RESISTORSŠ CAPACITORSŠ COILSŠ DELAY LINES
SILICONE COATED 1/2 WATT TO 50 WATT
RCD 160F
100 SERIES
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
10K5%
Series 100 resistors offer exceptional performance at an economical
ˆ World’s widest range of axial lead WW resistors! 0.005to 2M,
tolerances to ±0.005%, 1/2W to 50W, numerous design options
ˆ Low cost! Available on exclusive SWIFTTM delivery program
cost. Superior stability results from welded construction and windings of
premium grade resistance wire on thermally conductive ceramic cores.
Hi-temp coating provides excellent environmental protection and solvent
resistance. Tin (or SnPb) coated copper or copperweld leads offer
OPTIONS
ˆ Option X: Low Inductance
ˆ Option P: Increased Pulse Capability
ˆ Option F: Flameproof Coating
ˆ Option ER: 100-Hour Burn-In
ˆ Option B: Increased Power
ˆ Radial leads (opt.R), low thermal emf (opt.E), matched sets, special
marking, cut &formed leads, hi-rel screening, non-standard values,
high voltage, etc. Customized components are RCD’s speciality!
excellent solderabilty and extended shelf life.
PULSE CAPABILITY: Excellent pulse capability results from wirewound
construction. The pulse/overload capability can often be economically
enhanced by a factor of 50% or more via special Option P processing.
Pulse capability is highly dependent on size and resistance value, consult
factory (available up to 500 joules).
INDUCTANCE: small sizes have inductance of 1- 50uH typ. Larger sizes
and higher values typically have greater levels. For non-inductive design,
specify Opt. X. The max. series inductance for Opt.X resistors at 0.5MHz
DERATING (derate W/V/A ratings when ambient temp. exceeds 25°C):
Char. U is the max. power for ±0.5% typ. load life stability & 275°C
hotspot, Char. V is max. power for ±3% stability & 350°C hotspot
100 CHAR. V
is listed in table (per MIL-R-39007). Specialty
constructions are available for even lower
inductance levels (Opt.75 inductance =
50% of Opt.X, Opt.76 = 33% of Opt.X).
RCD Type
102X-140X
145X-160X
165X-178X
50
0.2µH
0.3µH
0.65µH
> 50
0.37µH
0.6µH
1.2µH
75
50
25
0
-65 25
CHAR. U
Tol <0.1%
50 75 100 125 150 175 200 225 250 275 300 325
AMBIENT TEMPERATURE ( °C )
350
1.375” Min9
Type 102 is 1.1”
A3
D
C2
RCD
Type
MIL
Type5
Std. Wattage
Ratings
Char.U Char.V
Opt.B Wattage
Ratings
Char.U Char.V
Resistance
Range 6, 7
Maximum
Voltage
Rating 1,6
DIMENSIONS [Numbers in brackets are mm]
A 3 C2 D8 ± .003 [.08]
± .062 [1.58] ± .032 [.81] Std.
Optional
102
-
0.5 0.8
0.8 1.0
.01- 2K
30V .16 ±.03 [4.±.8] .07±.02[1.8±.5] .020
-
110 RW81 (110B) 0.8 1.0
1.5 2.0
.01- 8K
40V .24 ±.03 [6.±.8] .085 [2.16] .020 .024 (opt. 22)
115
-
1.0 1.2
1.5 2.0
.01- 12K
45V .312 [7.92] .085 [2.16] .020 .024 (opt. 22)
120
-
1.0 1.2
- - .01- 15K
50V .344 [8.74] .093 [2.36] .020 .024 (opt. 22)
Stock 125 RW70 (125B RW80) 1.5 1.8
2.0 2.5
.01- 20K
55V .406 [10.3] .093 [2.36] .020 .024 (opt. 22)
130
-
1.6 2.0
--
.01- 22K
65V .530 [13.5] .093 [2.36] .020 .024 (opt. 22)
133
-
2.0 3.0
3.0 4.0 .005- 20K
80V .355 [9.00] .156 [3.96] .032 .024 (opt. 22)
Stock 135
RW69
3.0 4.0
4.0 5.0 .005- 40K
140V .500 [12.7] .188 [4.78] .032 .024(22), .040(18)
140
RW79
3.0 4.0
4.0 5.0 .005- 50K
140V .550 [14.2] .188 [4.78] .032 .040 (opt. 18)
145
-
3.5 4.5
4.5 6.5 .005- 60K
180V .770 [19.6] .188 [4.78] .032 .040 (opt. 18)
150
-
3.5 4.5
5.0 7.0 .005- 60K
150V .500 [12.7] .225 [5.72] .040 .032 (opt. 20)
155
-
4.0 5.0
6.0 8.0 .005- 100K
210V .625 [15.9] .225 [5.72] .040 .032 (opt. 20)
156
-
5.0 6.0
- - .005- 150K
300V .800 [20.3] .250 [6.35] .040 .032 (opt. 20)
Stock 160
RW74
5.0 7.0
7.0 10
.005- 200K
400V .875 [22.2] .312 [7.92] .040 .032 (opt. 20)
165
RW67
6.0 7.5
- - .005- 220K
450V 1.000 [25.4] .312 [7.92] .040 .032 (opt. 20)
170
-
7.0 9.0
10 12 .005- 300K
550V 1.200 [30.9] .312 [7.92] .040 .032 (opt. 20)
171
-
7.0 8.5
- - .005- 250K
700V 1.660 [42.2] .208 [5.28] .032 .040 (opt. 18)
172
-
8.5 10
- - .005- 400K
900V 2.100 [53.3] .225 [5.72] .032 .040 (opt. 18)
173
-
9.0 11
12 14 .005- 400K
650V 1.550 [39.4] .300 [7.62] .040 .032 (opt. 20)
Stock 1754
RW68, 78
10 13
15 18 .005- 500K
900V 1.7204 [43.7] .3504 [8.89] .040 .032 (opt. 20)
176
-
10 12
- - .005- 500K
800V 1.875 [47.6] .300 [7.62] .040 .032 (opt. 20)
178
-
13 15
- - .01- 750K
1150V 2.410 [61.2] .350 [8.89] .040 .032 (opt. 20)
180
RW56
14 16
16 20
.01- 800K
1000V 2.100 [53.3] .500 [12.7] .040
-
185
-
20 25
--
.015- 1M
1350V 2.800 [71.1] .500 [12.7] .040
-
186 - 25 30
.010- 1M
1400V 4.060 [103] .350 [8.89] .040 .032 (opt. 20)
190
-
40 50
--
.025- 2M
1500V 5.000 [127] .500 [12.7] .040
-
1 Working voltage= (PR)1/2, not to exceed max rating (multiply by 0.7 for Opt.X). 2 Allow .032” additional for Opt X or values <13 Coating overflow onto each lead 2xD 4 Until existing inventory is depleted, type 175 may
be .397” [10mm] dia.x 1.81 [46] long with 1.3”[33] lead length 5 Military p/n’s are given for reference only and do not imply qualification or exact interchangeability. 6 Increased range avail. 7 Resis. value measured at 3/8”
±1/16” from each end of body 8 Heavier lead gauge option is recommended on low values to enable lower leadwire resis., increased current, and improved TC 9 Lead length applies to bulk packaged units (taped parts may
be shorter, refer to taping spec.) 10 Dependent on value, options, etc
TYPICAL PERFORMANCE10
Load Life (Char.U)
±0.5% (±1% on sizes >10W)
P/N DESIGNATION:
RCD Type
135 - 102 - J B W
Thermal Shock
Moisture Resistance
±0.2%
±0.2%
Options: X, R, V, P, F, ER, E, B, 76, 75, 22, 20, 18
(leave blank if standard)
Shock and Vibration
Overload, 5 Sec
Dielectric Strength
Max. Current (not to exceed
wattage or voltage rating)
TC (ppm/°C) 10
1- 9.9
0.1- .99
.05-.099
.01-.049
±0.1%
5x rated W 102-156, 10x W 160-190
500V (for 1KV specify opt.33)
Resistors with .020" dia leads = 11A,
.024" = 15A, .032" = 22A, .040"= 30A
20ppm (5 & 10ppm avail.)
50ppm (10, 20, 30ppm avail.)
90ppm (20, 30, 50 ppm avail.)
300ppm (50, 100, 200ppm avail.)
600ppm (100, 200, 300ppm avail.)
Resis. Code 1% & tighter tols: 3 signif. digits & multiplier,
e.g. R100= 0.1, 1R00= 1,1000= 100, 1001= 1K.
2%-10%: 2digits &multiplier (R10= .1Ω, 1R0=1,100=10, 102=1K).
Use extra digits as needed: R005, R0075, R012, etc.
Tolerance: K=10%, J=5%, H=3%, G=2%, F=1%, D=0.5%,
C=0.25%, B=0.1%, A=0.05%, Q=0.02%, T=0.01%, V=.005%
Packaging: B= Bulk, T= T&R (avail. on type 102 to 176)
Optional TC: 5= 5ppm, 10= 10ppm, 20= 20ppm, 30= 30ppm,
50= 50ppm, 101= 100ppm, 201=200ppm (leave blank if std)
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
FA039G Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
43


Features www.DataSheet4U.com 100 SERIES PRECISI ON POWER WIREWOUND RESISTORS SILICONE C OATED 1/2 WATT TO 50 WATT RoHS Term.W i s RoHS compliant & 260°C compatible R ESISTORSŠ CAPACITORSŠ COILSŠ DELAY L INES RCD 160F 10KΩ 5% ˆ World’s widest range of axial lead WW resistors ! 0.005Ω to 2MΩ, tolerances to ±0. 005%, 1/2W to 50W, numerous design opti ons ˆ Low cost! Available on exclusive SWIFTTM delivery program OPTIONS ˆ Op tion X: Low Inductance ˆ Option P: Inc reased Pulse Capability ˆ Option F: Fl ameproof Coating ˆ Option ER: 100-Hour Burn-In ˆ Option B: Increased Power Radial leads (opt.R), low thermal emf (opt.E), matched sets, special marking , cut &formed leads, hi-rel screening, non-standard values, high voltage, etc. Customized components are RCD’s spec iality! DERATING (derate W/V/A ratings when ambient temp. exceeds 25°C): Char . U is the max. power for ±0.5% typ. l oad life stability & 275°C hotspot, Ch ar. V is max. power for ±3% stability & 350°C hotspot % RATED POWER Series 100 resistors.
Keywords 135-xxxx, datasheet, pdf, RCD Components, Precesion, Power, Wirewoumd, Resistors, 35-xxxx, 5-xxxx, -xxxx, 135-xxx, 135-xx, 135-x, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)