iButton Retainer
www.DataSheet4U.com
DS9098P
iButton Retainer
www.dalsemi.com
FEATURES
Compact receptacle for F5 iButton mounting Full...
Description
www.DataSheet4U.com
DS9098P
iButton Retainer
www.dalsemi.com
FEATURES
Compact receptacle for F5 iButton mounting Fully backward-compatible to DS9098 Contacts are stainless steel with selective tinlead plating for optimal solderability to printed circuit board Retainer to iButton connection is stainless steel to stainless steel Withstands up to 250°C for surface mounting Double redundancy of contacts (2 plus 2) Contact force exceeds 200 grams for reliable connection Prevents reversed insertion At insertion, the iButton is latched for retention The iButton pops up for removal when latch is released Gentle deflection of latches allows removal of the iButton >25 insertion/withdrawal cycles with no performance degradation Compatible with standard pick and place equipment Cleaning fluids drain freely for quick clean up
19.30
3-D View
39°
39°
Top View
Latch
8.12
14.35 2.60 13.00 17.60
∅ 16.50 ∅ 19.50 3.40 4.40
Bottom View
Side View
Recommended Printed Circuit Layout Pads
Data Trace 8.5 Copper cladding ≥ 0.3 kg/m2 or ≥ 34 µm (≥ 1oz/sq.ft) with soldermask overlay Ø18.3
Ø13.7
ORDERING INFORMATION
DS9098P-TRL Tape & Reel, 220 parts per 13 inch reel
Ø10.8
Center – Data Outer Ring – Ground All dimensions are in millimeters.
DESCRIPTION
The DS9098P iButton Retainer is a low-cost, surface-mount device to secure an F5 iButton on a printed circuit board. It consists of three metal pieces (two for GROUND, one for DATA) molded into a body of black, heat-stabilized, 30% glass ...
Similar Datasheet