2 Mbit Serial Flash Memory
www.DataSheet4U.com
EN25F20
EN25F20
2 Mbit Serial Flash Memory with 4Kbytes Uniform Sector
FEATURES
• Single power sup...
Description
www.DataSheet4U.com
EN25F20
EN25F20
2 Mbit Serial Flash Memory with 4Kbytes Uniform Sector
FEATURES
Single power supply operation - Full voltage range: 2.7-3.6 volt 2 Mbit Serial Flash - 2 M-bit/256 K-byte/1024 pages - 256 bytes per programmable page High performance - 100MHz clock rate Low power consumption - 5 mA typical active current - 1 μA typical power down current Uniform Sector Architecture: 64 sectors of 4-Kbyte 4 blocks of 64-Kbyte Any sector or block can be erased individually - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin High performance program/erase speed Page program time: 1.5ms typical Sector erase time: 150ms typical Block erase time 800ms typical Chip erase time: 3 Seconds typical
Lockable 256 byte OTP security sector Minimum 100K endurance cycle Package Options - 8 pins SOP 150mil body width - 8 contact VDFN - All Pb-free packages are RoHS compliant Commercial and industrial temperature Range
Software and Hardware Write Protection:
GENERAL DESCRIPTION
The EN25F20 is a 2M-bit (256K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.
The EN25F20 is designed to allow either single Sector at a time or full chip erase operation. The EN25F20 can be configured to protect part of the memory as the software protected mode. The device can su...
Similar Datasheet