4 Mbit Serial Flash Memory
www.DataSheet4U.com
EN25F40
EN25F40
4 Mbit Serial Flash Memory with 4Kbytes Uniform Sector
FEATURES
• Single power sup...
Description
www.DataSheet4U.com
EN25F40
EN25F40
4 Mbit Serial Flash Memory with 4Kbytes Uniform Sector
FEATURES
Single power supply operation - Full voltage range: 2.7-3.6 volt 4 Mbit Serial Flash - 4 M-bit/512 K-byte/2048 pages - 256 bytes per programmable page High performance - 100MHz clock rate Low power consumption - 5 mA typical active current - 1 μA typical power down current Uniform Sector Architecture: 128 sectors of 4-Kbyte 8 blocks of 64-Kbyte Any sector or block can be erased individually - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin High performance program/erase speed Page program time: 1.5ms typical Sector erase time: 150ms typical Block erase time 800ms typical Chip erase time: 5 Seconds typical
Lockable 256 byte OTP security sector Minimum 100K endurance cycle Package Options 8 pins SOP 150mil body width 8 pins SOP 200mil body width 8 contact VDFN 8 pins PDIP All Pb-free packages are RoHS compliant
Software and Hardware Write Protection:
Commercial and industrial temperature Range
GENERAL DESCRIPTION
The EN25F40 is a 4M-bit (512K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.
The EN25F40 is designed to allow either single Sector at a time or full chip erase operation. The EN25F40 can be configured to protect part of the memory as the softw...
Similar Datasheet