16 Mbit Uniform Sector Flash Memory
www.DataSheet4U.com
EN25P16
EN25P16
16 Mbit Uniform Sector, Serial Flash Memory
FEATURES
• Single power supply operati...
Description
www.DataSheet4U.com
EN25P16
EN25P16
16 Mbit Uniform Sector, Serial Flash Memory
FEATURES
Single power supply operation - Full voltage range: 2.7-3.6 volt 16 Mbit Serial Flash - 16 M-bit/2048 K-byte/8192 pages - 256 bytes per programmable page High performance - 75MHz clock rate Low power consumption - 5 mA typical active current - 1 μA typical power down current Uniform Sector Architecture: - Thirty two 64-Kbyte sectors Software and Hardware Write Protection: - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin High performance program/erase speed Byte program time: 7µs typical Page program time: 1.5ms typical Sector erase time: 800ms typical Chip erase time: 18 Seconds typical
Minimum 100K endurance cycle Package Options 8 pins SOP 200mil body width 8 contact VDFN 16 pin SOP 300mil body width All Pb-free packages are RoHS compliant
Commercial and industrial temperature Range
GENERAL DESCRIPTION
The EN25P16 is a 16M-bit (2048K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.
The EN25P16 is designed to allow either single Sector at a time or full chip erase operation. The EN25P16 can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector.
This Data Sheet may b...
Similar Datasheet